| Linux/UNIX Linuxverfechter finden hier Weggefährten. |
Problem mit XOrg (glaub ich)
Diskussion: Problem mit XOrg (glaub ich) im Forum Linux/UNIX, in der Kategorie Operating Systems; Anzeige
Hi,
ich hab ja in meinem Inspiron6000 die ATI Radeon X300. Jetzt hab ich den ATI Driver Installer mal ...
 | 
17.01.06, 18:23
|
#1 (permalink)
| | Guest |  Problem mit XOrg (glaub ich)
Anzeige Hi,
ich hab ja in meinem Inspiron6000 die ATI Radeon X300. Jetzt hab ich den ATI Driver Installer mal ausgeführt und lauf Installier war die Installation erfolgreich. Dann hab ich fglrxconfig oder so ähnlich ausgeführt. Dadurch wird eine XOrg.config erstellt und mit der alten überschrieben (hab die alte aber gesichert). Nach einem Neustart ist das hier sehr seltsam:
1. Auflösung auf 1280x768 statt 1280x800
2. Manche Zeilen (von dem Text den ich hier schreibe) sind größer als andere
3. Wenn ich die Auflösung oder irgendwas anderes in Sax2 ändere und auf "Test" klicke kommt diese Meldung: Zitat:
Fehler beim Testen der Konfiguration
Weitere Informationen finden Sie in der Datei /var/log/Xorg.99.log. Der folgende Bericht wurde von der aufrufenden Instanz erstellt:
SaX library: Erfolg
X configuration: No information
| Die log-Datei sieht so aus: Zitat:
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux INSPIRON6000 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686
Build Date: 12 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 16 18:05:14 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,0188 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,0188 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,0188 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,0188 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,0188 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,0188 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,0188 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,0188 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1028,0188 rev 03 class 01,01,80 hdr 00
(II) PCI: 01:00:0: chip 1002,5460 card 1028,2003 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,0188 rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0476 card 2000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 03:01:1: chip 1180,0552 card 1028,0188 rev 08 class 0c,00,10 hdr 80
(II) PCI: 03:01:2: chip 1180,0822 card 1028,0188 rev 17 class 08,05,01 hdr 80
(II) PCI: 03:03:0: chip 8086,4220 card 8086,2722 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,7), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002000 - 0x00003fff (0x2000) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x40000000 - 0x41ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[B]
[1] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x40000000 - 0x41ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5460) rev 0, Mem @ 0xd0000000/27, 0xdfdf0000/16, I/O @ 0xde00/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[1] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[2] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[3] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[10] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[11] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[12] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[14] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[15] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[16] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[17] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[18] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[19] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[20] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[21] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[22] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[1] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[2] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[3] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[4] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[5] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[10] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[11] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[12] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[14] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[15] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[16] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[17] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[18] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[19] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[20] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[21] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[22] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[18] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[22] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[23] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[24] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[25] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[26] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[27] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[28] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[29] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": object file contains no symbols
(II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": object file contains no symbols
(II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": object file contains no symbols
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.20.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460),
MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.20.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.20g1
(II) ATI Proprietary Linux Driver Build Date: Dec 6 2005 20:05:53
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.20.1-driver-lnx-232334
(--) Chipset MOBILITY RADEON X300 (M22 5460) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[18] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[22] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[23] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[24] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[25] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[26] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[27] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[28] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[29] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8222a70
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[6] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[7] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[8] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[9] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[10] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[11] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[25] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[26] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[27] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[28] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[29] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[30] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[31] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[32] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "off"
(**) fglrx(0): Option "DesktopSetup" "mirror"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "on"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "TVFormat" "PAL-G"
(**) fglrx(0): Option "TVStandard" "VIDEO"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "MOBILITY RADEON X300 (M22 5460)" (Chipset = 0x5460)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2003)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfdf0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON (M24)
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: P22
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/X11R6/lib/modules/linux/libdrm.a
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0): Display1: No EDID information from DDC.
(II) fglrx(0): Derived EDID from BIOS and internal tables for Display1:
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MS_ Model: 0 Serial#: 0
(II) fglrx(0): Year: 1990 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:Serration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40 vert.: 30
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.1 MHz Image Size: 0 x 0 mm
(II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1328 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 800 v_sync_end 800 v_blanking: 823 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3. 5 power states available:
(II) fglrx(0): 1. 297/216MHz @ 60Hz [enable load balancing]
(II) fglrx(0): 2. 100/122MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0): 3. 105/182MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(II) fglrx(0): 4. 209/182MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0): 5. 209/182MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(**) fglrx(0): QBS enabled
(**) fglrx(0): QBS Sync Mode is 1
(==) fglrx(0): Overlay Scaler is disabled
(==) fglrx(0): FAST_SWAP disabled (Quad Buffer Stereo support is mutual exclusive with FAST_SWAP)
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 71.11 1024 1168 1200 1440 768 788 792 823
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 71.11 800 1056 1088 1440 600 704 708 823
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 71.11 640 976 1008 1440 480 644 648 823
(**) fglrx(0): Default mode "848x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 71.11 848 1080 1112 1440 480 644 648 823
(**) fglrx(0): Default mode "720x576": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 71.11 720 1016 1048 1440 576 692 696 823
(**) fglrx(0): Default mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 71.11 720 1016 1048 1440 480 644 648 823
(**) fglrx(0): Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 71.11 640 976 1008 1440 400 604 608 823
(**) fglrx(0): Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350" 71.11 640 976 1008 1440 350 579 583 823
(**) fglrx(0): Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 71.11 512 912 944 1440 384 596 600 823
(**) fglrx(0): Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300" 71.11 400 856 888 1440 600 704 708 823
(**) fglrx(0): Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240" 71.11 320 816 848 1440 480 644 648 823
(**) fglrx(0): Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200" 71.11 320 816 848 1440 400 604 608 823
(--) fglrx(0): Display dimensions: (400, 300) mm
(--) fglrx(0): DPI set to (65, 65)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.20.8
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x0000063c
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdfcfd000 - 0xdfcfdfff (0x1000) MX[B]
[8] -1 0 0xdfcfc700 - 0xdfcfc7ff (0x100) MX[B]
[9] -1 0 0xdfcfc800 - 0xdfcfcfff (0x800) MX[B]
[10] -1 0 0xdfcfe000 - 0xdfcfffff (0x2000) MX[B]
[11] -1 0 0xdffffd00 - 0xdffffdff (0x100) MX[B]
[12] -1 0 0xdffffe00 - 0xdfffffff (0x200) MX[B]
[13] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B]
[14] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] 0 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[24] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[28] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[29] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[B]
[30] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[B]
[31] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[32] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[33] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[B]
[34] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[35] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area: 0xd0501000 (size=0x07aef000)
(II) fglrx(0): UMM area: 0xd0501000 (size=0x07aef000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x07ff0000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 7419
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
SetClientVersion: 0 8
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
|
4. Der Name der Karte ist immernoch "ATI Radeon Mobility M300 (M22) 5460 (PCIE)
In der Log-Datei steht ja "failed to load fglrx module" oder so was ähnliches. Woran kann das liegen?
Hier mal die XOrg.conf die von fglrxconfig erstellt wurde: Zitat:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# ************************************************** ********************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# ************************************************** ********************
# ************************************************** ********************
# DRI Section
# ************************************************** ********************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# ************************************************** ********************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# ************************************************** ********************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# ************************************************** ********************
# Files section. This allows default font and rgb paths to be set
# ************************************************** ********************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# ************************************************** ********************
# Server flags section.
# ************************************************** ********************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# ************************************************** ********************
# Input devices
# ************************************************** ********************
# ************************************************** ********************
# Core keyboard's InputDevice section
# ************************************************** ********************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "de"
EndSection
# ************************************************** ********************
# Core Pointer's InputDevice section
# ************************************************** ********************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# ************************************************** ********************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# ************************************************** ********************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# ************************************************** ********************
# Monitor section
# ************************************************** ********************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === Active Stereo mode lines based on GTF ===
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# XVGA @ 120Hz
# Modeline "1024x768@120" 139.054 1024 1104 1216 1408 768 769 772 823 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SXGA @ 120Hz
# Modeline "1280x1024@120" 233.793 1280 1384 1528 1776 1024 1025 1028 1097 +hsync +vsync
EndSection
# ************************************************** ********************
# Graphics device section
# ************************************************** ********************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "mirror"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "TVFormat" "PAL-G"
Option "TVStandard" "VIDEO"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "off"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "on"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5460
Screen 0
EndSection
# ************************************************** ********************
# Screen sections
# ************************************************** ********************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# ************************************************** ********************
# ServerLayout sections.
# ************************************************** ********************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
|
mfg
jagdfalke | |
|  | |
18.01.06, 00:54
|
#2 (permalink)
| | Moderator
Registriert seit: 12.02.02 Likes: 0 |
Hi,
änder doch mal die offensichtliche Zeile:
Modes "1280x1024" "1024x768" "800x600" "640x480"
in:
Modes "1280x800" "1024x768" "800x600" "640x480"
Wenn du ne 1280x800erter Auflösung möchtest ...
und dann machst du noch das was dir fglrx sagt: Zitat:
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
| Also DRI in den kernel kompilieren. | 
| | | |
| | HaBOT
| - Anzeige -
| 
| | |
18.01.06, 12:04
|
#3 (permalink)
| | Guest |
Ähm, ja, das mit den Modes hat geklappt. Aber warum ließ/lässt sich das nicht in Sax2 umschalten? Wegen dem DRI? By the way: Was ist DRI eigentlich und wie compiliere ich das da rein?
Wenn ich mir recht erinnere: kernel sources installieren, YOU Update, make menuconfig, make
Stimmt das soweit? Jetzt dann nochwas oder wars das?
mfg
jagdfalke | |
| | |
18.01.06, 17:29
|
#4 (permalink)
| | Member of Honour
Registriert seit: 03.10.01 Likes: 1 |
Du brauchst das Modul AFAIK nicht in den Kernel kompilieren. Zitat: |
[drm] failed to load kernel module "fglrx"
| Das ist der eigentlich interessante Teil.
Ich würde mal ganz spontan darauf tippen, dass die Kernel und fglrx Versionen nicht zueinander passen. Hab ich auch öfter nach nem Kernel-update, ist zumindest bei fedora aber auch schnell aus der Welt. | |
| | |
19.01.06, 17:56
|
#5 (permalink)
| | Guest |
Und wie krieg ich das "aus der Welt" ?
mfg
jagdfalke | |
| | |
19.01.06, 21:30
|
#6 (permalink)
| | Member of Honour
Registriert seit: 03.10.01 Likes: 1 |
Indem du dir das zu deiner kernel version passende fglrx modul holst. | |
| | |
19.01.06, 22:51
|
#7 (permalink)
| | Guest |
Aber das sollte doch dieser Installer von ATI selber hinbekommen oder nicht? Ich mein mehr als Installer runterladen und installieren kann ich ja nicht tun oder?
mfg
jagdfalke | |
| | | | |
| | | - Anzeige -
| |
| |
[HaBo]
» Operating Systems
» Linux/UNIX
»
Problem mit XOrg (glaub ich)
| Themen-Optionen | | | | Ansicht |  Linear-Darstellung |
Forumregeln
| Es ist Ihnen nicht erlaubt, neue Themen zu verfassen. Es ist Ihnen nicht erlaubt, auf Beiträge zu antworten. Es ist Ihnen nicht erlaubt, Anhänge hochzuladen. Es ist Ihnen nicht erlaubt, Ihre Beiträge zu bearbeiten.
HTML-Code ist aus.
| | |
| 
Ähnliche Themen 
