[HaBo]

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=NO
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=NO
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key

# Simple configuration file for xinetd
#
# Some defaults, and include /etc/xinetd.d/

defaults
{
        log_type = SYSLOG daemon info
        log_on_success = HOST PID
        log_on_failure = HOST
        per_source  = 5
}

includedir /etc/xinetd.d

mathias@wizard:/etc/xinetd.d$ ls
chargen  daytime  discard  echo  time  vsftpd 
mathias@wizard:/etc/xinetd.d$

service ftp
{
        disable         	= no
        socket_type             = stream
        wait                    = no
        user                    = root
        server          	= /usr/sbin/vsftpd
        nice                    = 10
}

mathias@wizard:/etc/xinetd.d$ ftp localhost
Connected to localhost.
220 (vsFTPd 2.0.5)
Name (localhost:mathias): mathias
530 This FTP server is anonymous only.
Login failed.
ftp>

mathias@wizard:~$ cat /etc/services | grep ftp
ftp-data        20/tcp
ftp             27566/tcp
vsftpd_local    31788/tcp
tftp            69/udp
sftp            115/tcp
ftps-data       989/tcp                         # FTP over SSL (data)
ftps            990/tcp
venus-se        2431/udp                        # udp sftp side effect
codasrv-se      2433/udp                        # udp sftp side effect
frox            2121/tcp                        # frox: caching ftp proxy
zope-ftp        8021/tcp                        # zope management by ftp

mathias@wizard:/etc/xinetd.d$ ls -all
total 24
drwxr-xr-x   2 root root  4096 2008-03-05 21:26 .
drwxr-xr-x 132 root root 12288 2008-03-05 21:24 ..
-rw-r--r--   1 root root   469 2008-03-03 12:13 vsftpd
-rw-r--r--   1 root root   297 2008-03-03 12:09 vsftpd_local

mathias@wizard:/etc/xinetd.d$ cat ./vsftpd
# vsftp daemon.
service ftp
{
        disable         =       no
        socket_type     =       stream
        wait            =       no
        user            =       root
        server          =       /usr/sbin/vsftpd
        per_source      =       5
        instances       =       200
        log_on_success  +=      PID HOST DURATION
        log_on_failure  +=      HOST
        nice            =       10
        server_args     =       /etc/vsftpd.conf
}

mathias@wizard:/etc/xinetd.d$ cat ./vsftpd_local 
# vsftp daemon.
service vsftpd_local
{
        disable         =       no
        socket_type     =       stream
        wait            =       no
        user            =       root
        server          =       /usr/sbin/vsftpd
        per_source      =       5
        instances       =       200
        log_on_success  +=      PID HOST DURATION
        log_on_failure  +=      HOST
        nice            =       10
        server_args     =       /etc/vsftpd.conf_local
}