Netzwerkverbindung unter Linux funktioniert nach Windows-Installation nicht mehr

Seit ich vor ein paar Tagen Windows 7 installiert habe, funktioniert beim parallel installierten Ubuntu (und auch anderen Distributionen) die Netzwerkverbindung nicht mehr.

Unter Windows beträgt die Internet-Geschwindikgeit 14/1 MBit, so wie es sein soll und auch im Netzwerk gibt es keine Probleme. Unter Ubuntu kann ich den Test mit viel Glück zuende bringen, und die Geschwindigkeit ist etwa 2/0,2 Mbit, Tendenz schnell fallend bei gleichzeitig steigendem Packet Loss. Nach ein paar Sekunden kann ich dann keine Seiten mehr aufrufen und auch lokal nichts mehr pingen.

Ein Neustart löst das Problem temporär, es geht dann aber sofort wieder von vorne los. Andere Linux-PCs im Netzwerk haben das Problem nicht.
Ein BIOS-Reset hat nicht geholfen.

Die Netwerkkarte ist eine "Realtek PCIe GBE Family Controller" onboard-Karte, das Mainboard ein Z68X-UD3H-B3.

edit: Es tritt definitiv nur nach Windows-7-Nutzung auf und nachdem ich den PC (und den Router, aber das hatte ich ja vorher schon versucht) einmal komplett ausgeschaltet habe, geht es unter Ubuntu wieder ohne Probleme. Kann das jemand erklären?
 
Zuletzt bearbeitet:
Ich würde es mal mit einer statischen IP-Adresse sowohl bei Windows als auch bei Linux probieren.

Auch könnte man den Linux/Windows-PC mal aus dem Router entfernen und neu registrieren lassen.
 
Ich würde es mal mit einer statischen IP-Adresse sowohl bei Windows als auch bei Linux probieren.

An Netzwerkeinstellungen habe ich alles versucht. Gleiche und unterschiedliche feste IP, DHCP. Macht keinen Unterschied.

Auch könnte man den Linux/Windows-PC mal aus dem Router entfernen und neu registrieren lassen.

Das sollte beim Router-Reset eigentlich auch passiert sein.

Ich vermute eher, dass Windows irgendetwas mit der Netzwerkkarte anstellt, womit Linux nicht klar kommt. Ich habe über Google mittlerweile auch Leute gefunden, die das Problem genau andersherum haben.

Was kann denn bei der Netzwerkkarte eingestellt werden, das einen normalen Reboot überlebt und ein komplettes Ausschalten nicht?
 
Was kann denn bei der Netzwerkkarte eingestellt werden, das einen normalen Reboot überlebt und ein komplettes Ausschalten nicht?

Vermutlich liegt es am Bootloader, wenn andere das Problem nur andersherum haben, die verwenden sicherlich dann den Linux-Bootloader und Du den Windows?

Vielleicht hilft auch dieser kleine Bootmanager: Plop - Bootmanager - Freier Boot Manager, interner usb treiber eingebaut, unterschiedliche Betriebssysteme booten, cdrom, usb, freeware, option rom bios

Ansonsten bin ich erst einmal überfragt, sorry.
 
Mit dem Bootloader hat das sicherlich nichts zu tun, da es auf anderen Systemen mit der gleichen Konfiguration problemlos funktioniert.
 
*achtung, Halbwissen - allerdings gibt es sonst keine Antworten*
Ich tippe darauf, dass der Zustand der Karte beim Neustarten nicht "resettet" wird.
Probiere mal in Windows vor dem Neustart das Gerät abzuschalten (wahlweise nur die Verbindung oder eben im Gerätemanager die Karte selbst) bzw. in Linux iwconfig blub power off (oder ähnliches) durchzuführen (keine Ahnung, ob das ausreicht - Ziel wäre, die Karte "neuzustarten" bzw. zu "resetten")
 
*achtung, Halbwissen - allerdings gibt es sonst keine Antworten*
Ich tippe darauf, dass der Zustand der Karte beim Neustarten nicht "resettet" wird.
Probiere mal in Windows vor dem Neustart das Gerät abzuschalten (wahlweise nur die Verbindung oder eben im Gerätemanager die Karte selbst) bzw. in Linux iwconfig blub power off (oder ähnliches) durchzuführen (keine Ahnung, ob das ausreicht - Ziel wäre, die Karte "neuzustarten" bzw. zu "resetten")

Interessant. Dadurch verändert sich auf jeden Fall etwas, aber das Problem ist nicht behoben. Die Netzwerkverbindung bleibt danach (Netzwerkkarte in Windows deaktivieren und dann auch noch ifconfig eth0 down/up) etwas länger bei der niedrigen Geschwindigkeit und ist statt nach ein paar Seitenaufrufen erst nach ein paar Minuten weg.
 
Kannst Du mal die Ausgabe des "lspci -vvv" Posten?
Und ein dmesg wäre auch nicht so ganz verkehrt ;)

Und probiere mal "iwconfig _karte_ power off" - das sollte das Powermanagement erstmal komplett deaktivieren (macht manchmal auch Probleme)

Edit: fällt mir erst jetzt auf, dass es sich um "kabelgebundenes" Netz handelt. k.A warum ich die ganze Zeit an WLAN dachte.
lspci -vvv wäre aber trotzdem interessant.
 
Hier ist lspci -vvv, der Netzwerkkartenteil:

Code:
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 4 bytes
    Interrupt: pin A routed to IRQ 40
    Region 0: I/O ports at ee00 [size=256]
    Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K]
    Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee0100c  Data: 4161
    Capabilities: [70] Express (v2) Endpoint, MSI 01
        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 4096 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
            ClockPM+ Surprise- LLActRep- BwNot-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB
    Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
        Vector table: BAR=4 offset=00000000
        PBA: BAR=4 offset=00000800
    Capabilities: [d0] Vital Product Data
        Unknown small resource type 00, will not decode more.
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
        AERCap:    First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Capabilities: [140 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
    Kernel driver in use: r8169
    Kernel modules: r8169

Und dmesg:

Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-11-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:17:25 UTC 2011 (Ubuntu 2.6.38-11.50-generic 2.6.38.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=99481dad-4bd8-420f-a95d-43cc61ae4081 ro quiet splash vt.handoff=7
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000daf80000 (usable)
[    0.000000]  BIOS-e820: 00000000daf80000 - 00000000dafa3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dafa3000 - 00000000dafe0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dafe0000 - 00000000db000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000021fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z68X-UD3H-B3/Z68X-UD3H-B3, BIOS F4 06/22/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask FE0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdaf80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5ce0] f5ce0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000daf80000
[    0.000000]  0000000000 - 00dae00000 page 2M
[    0.000000]  00dae00000 - 00daf80000 page 4k
[    0.000000] kernel direct mapping tables up to daf80000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000021fe00000
[    0.000000]  0100000000 - 021fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 21fe00000 @ daf76000-daf80000
[    0.000000] RAMDISK: 366cc000 - 3735e000
[    0.000000] ACPI: RSDP 00000000000f7880 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000dafa3040 00054 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000dafa3100 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000dafa31c0 04DDD (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
[    0.000000] ACPI: FACS 00000000daf80000 00040
[    0.000000] ACPI: MSDM 00000000dafa8100 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000dafa81c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000dafa8240 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: ASPT 00000000dafa8300 00034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
[    0.000000] ACPI: SSPT 00000000dafa8340 02380 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
[    0.000000] ACPI: EUDS 00000000dafaa6c0 000C0 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: MATS 00000000dafaa780 00034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000dafaa7e0 00CFA (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000dafa8000 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000dafab500 018B8 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: MATS 00000000dafacdc0 0AAD3 (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000021fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000021fe00000
[    0.000000]   NODE_DATA [000000021fdfb000 - 000000021fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217c00000-ffff88021edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0021fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000daf80
[    0.000000]     0: 0x00100000 -> 0x0021fe00
[    0.000000] On node 0 totalpages: 2075919
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 878520 pages, LIFO batch:31
[    0.000000]   Normal zone: 16121 pages used for memmap
[    0.000000]   Normal zone: 1163015 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000daf80000 - 00000000dafa3000
[    0.000000] PM: Registered nosave memory: 00000000dafa3000 - 00000000dafe0000
[    0.000000] PM: Registered nosave memory: 00000000dafe0000 - 00000000db000000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at db000000 (gap: db000000:19000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800dac00000 s84416 r8192 d22080 u262144
[    0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2045456
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=99481dad-4bd8-420f-a95d-43cc61ae4081 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8093576k/8910848k available (5943k kernel code, 607172k absent, 210100k reserved, 5015k data, 956k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 83886080 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.010000] Detected 3309.854 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6619.70 BogoMIPS (lpj=33098540)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000020] Security Framework initialized
[    0.000030] AppArmor: AppArmor initialized
[    0.000031] Yama: becoming mindful.
[    0.000544] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001776] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002261] Mount-cache hash table entries: 256
[    0.002331] Initializing cgroup subsys ns
[    0.002333] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.002335] Initializing cgroup subsys cpuacct
[    0.002337] Initializing cgroup subsys memory
[    0.002341] Initializing cgroup subsys devices
[    0.002343] Initializing cgroup subsys freezer
[    0.002344] Initializing cgroup subsys net_cls
[    0.002345] Initializing cgroup subsys blkio
[    0.002364] CPU: Physical Processor ID: 0
[    0.002365] CPU: Processor Core ID: 0
[    0.002369] mce: CPU supports 9 MCE banks
[    0.002378] CPU0: Thermal monitoring enabled (TM1)
[    0.002383] using mwait in idle threads.
[    0.004053] ACPI: Core revision 20110112
[    0.010587] ftrace: allocating 24328 entries in 96 pages
[    0.017135] Setting APIC routing to flat
[    0.017463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117346] CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
[    0.228095] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.228099] ... version:                3
[    0.228100] ... bit width:              48
[    0.228101] ... generic registers:      8
[    0.228102] ... value mask:             0000ffffffffffff
[    0.228102] ... max period:             000000007fffffff
[    0.228103] ... fixed-purpose events:   3
[    0.228104] ... event mask:             00000007000000ff
[    0.228384] Booting Node   0, Processors  #1 #2 #3
[    0.767483] Brought up 4 CPUs
[    0.767485] Total of 4 processors activated (26477.78 BogoMIPS).
[    0.769137] devtmpfs: initialized
[    0.769712] print_constraints: dummy: 
[    0.769735] Time: 22:01:21  Date: 10/02/11
[    0.769754] NET: Registered protocol family 16
[    0.769813] ACPI: bus type pci registered
[    0.769819] Trying to unpack rootfs image as initramfs...
[    0.769855] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.769856] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.775887] PCI: Using configuration type 1 for base access
[    0.776292] bio: create slab <bio-0> at 0
[    0.776859] ACPI: EC: Look up EC in DSDT
[    0.779442] ACPI Warning: Incorrect checksum in table [TAMG] - 0x42, should be 0x41 (20110112/tbutils-314)
[    0.779822] ACPI: Interpreter enabled
[    0.779824] ACPI: (supports S0 S3 S4 S5)
[    0.779834] ACPI: Using IOAPIC for interrupt routing
[    0.781986] ACPI: No dock devices found.
[    0.781987] HEST: Table not found.
[    0.781990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.782021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.782079] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.782080] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.782081] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.782083] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.782084] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.782085] pci_root PNP0A03:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[    0.782093] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.782117] pci 0000:00:02.0: [8086:0112] type 0 class 0x000300
[    0.782125] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
[    0.782130] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.782133] pci 0000:00:02.0: reg 20: [io  0xff00-0xff3f]
[    0.782174] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.782194] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.782250] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.782253] pci 0000:00:16.0: PME# disabled
[    0.782280] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.782299] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[    0.782366] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.782369] pci 0000:00:1a.0: PME# disabled
[    0.782389] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.782402] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[    0.782451] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.782454] pci 0000:00:1b.0: PME# disabled
[    0.782471] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.782528] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.782531] pci 0000:00:1c.0: PME# disabled
[    0.782552] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    0.782608] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.782611] pci 0000:00:1c.3: PME# disabled
[    0.782630] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.782687] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.782690] pci 0000:00:1c.4: PME# disabled
[    0.782710] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.782766] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.782769] pci 0000:00:1c.5: PME# disabled
[    0.782788] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[    0.782845] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.782848] pci 0000:00:1c.6: PME# disabled
[    0.782866] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[    0.782923] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.782926] pci 0000:00:1c.7: PME# disabled
[    0.782950] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.782968] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[    0.783036] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.783039] pci 0000:00:1d.0: PME# disabled
[    0.783055] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.783105] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[    0.783206] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[    0.783219] pci 0000:00:1f.2: reg 10: [io  0xfe00-0xfe07]
[    0.783225] pci 0000:00:1f.2: reg 14: [io  0xfd00-0xfd03]
[    0.783232] pci 0000:00:1f.2: reg 18: [io  0xfc00-0xfc07]
[    0.783238] pci 0000:00:1f.2: reg 1c: [io  0xfb00-0xfb03]
[    0.783245] pci 0000:00:1f.2: reg 20: [io  0xfa00-0xfa0f]
[    0.783252] pci 0000:00:1f.2: reg 24: [io  0xf900-0xf90f]
[    0.783282] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.783295] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[    0.783314] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.783341] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[    0.783354] pci 0000:00:1f.5: reg 10: [io  0xf700-0xf707]
[    0.783361] pci 0000:00:1f.5: reg 14: [io  0xf600-0xf603]
[    0.783367] pci 0000:00:1f.5: reg 18: [io  0xf500-0xf507]
[    0.783374] pci 0000:00:1f.5: reg 1c: [io  0xf400-0xf403]
[    0.783380] pci 0000:00:1f.5: reg 20: [io  0xf300-0xf30f]
[    0.783387] pci 0000:00:1f.5: reg 24: [io  0xf200-0xf20f]
[    0.783454] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.783457] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.783460] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.783465] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.783522] pci 0000:02:00.0: [1283:8892] type 1 class 0x000604
[    0.783645] pci 0000:02:00.0: supports D1 D2
[    0.783646] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.783652] pci 0000:02:00.0: PME# disabled
[    0.783680] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.783691] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[    0.783694] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.783697] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.783702] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.783806] pci 0000:03:02.0: [1106:3044] type 0 class 0x000c00
[    0.783842] pci 0000:03:02.0: reg 10: [mem 0xfbbff000-0xfbbff7ff]
[    0.783862] pci 0000:03:02.0: reg 14: [io  0xcf00-0xcf7f]
[    0.783992] pci 0000:03:02.0: supports D2
[    0.783993] pci 0000:03:02.0: PME# supported from D2 D3hot D3cold
[    0.784000] pci 0000:03:02.0: PME# disabled
[    0.784088] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[    0.784098] pci 0000:02:00.0:   bridge window [io  0xc000-0xcfff]
[    0.784104] pci 0000:02:00.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.784115] pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.784186] pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.784211] pci 0000:04:00.0: reg 10: [mem 0xfbaf8000-0xfbafffff 64bit]
[    0.784306] pci 0000:04:00.0: supports D1 D2
[    0.784307] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.784311] pci 0000:04:00.0: PME# disabled
[    0.797384] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[    0.797387] pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
[    0.797391] pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.797396] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.797457] pci 0000:05:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.797483] pci 0000:05:00.0: reg 10: [mem 0xfbef8000-0xfbefffff 64bit]
[    0.797580] pci 0000:05:00.0: supports D1 D2
[    0.797581] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.797586] pci 0000:05:00.0: PME# disabled
[    0.817362] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    0.817366] pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
[    0.817369] pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.817375] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.817436] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[    0.817455] pci 0000:06:00.0: reg 10: [io  0xee00-0xeeff]
[    0.817487] pci 0000:06:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[    0.817508] pci 0000:06:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[    0.817566] pci 0000:06:00.0: supports D1 D2
[    0.817567] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.817571] pci 0000:06:00.0: PME# disabled
[    0.837335] pci 0000:00:1c.6: PCI bridge to [bus 06-06]
[    0.837339] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.837342] pci 0000:00:1c.6:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.837347] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.837407] pci 0000:07:00.0: [1b4b:917a] type 0 class 0x000101
[    0.837425] pci 0000:07:00.0: reg 10: [io  0xdf00-0xdf07]
[    0.837436] pci 0000:07:00.0: reg 14: [io  0xde00-0xde03]
[    0.837448] pci 0000:07:00.0: reg 18: [io  0xdd00-0xdd07]
[    0.837459] pci 0000:07:00.0: reg 1c: [io  0xdc00-0xdc03]
[    0.837471] pci 0000:07:00.0: reg 20: [io  0xdb00-0xdb0f]
[    0.837483] pci 0000:07:00.0: reg 24: [mem 0xfbcff000-0xfbcff1ff]
[    0.837494] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.837531] pci 0000:07:00.0: PME# supported from D3hot
[    0.837535] pci 0000:07:00.0: PME# disabled
[    0.857306] pci 0000:00:1c.7: PCI bridge to [bus 07-07]
[    0.857310] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
[    0.857313] pci 0000:00:1c.7:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.857318] pci 0000:00:1c.7:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.857375] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[    0.857378] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.857381] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.857385] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.857387] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.857388] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.857389] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.857391] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.857392] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.857393] pci 0000:00:1e.0:   bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
[    0.857426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.857531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.857552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.857569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.857587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.857603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.857620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    0.857637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.857685]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.862467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.862494] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.862520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.862548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.862574] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.862600] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.862626] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.862652] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.862709] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.862715] vgaarb: loaded
[    0.862806] SCSI subsystem initialized
[    0.862837] libata version 3.00 loaded.
[    0.862861] usbcore: registered new interface driver usbfs
[    0.862867] usbcore: registered new interface driver hub
[    0.862878] usbcore: registered new device driver usb
[    0.862945] wmi: Mapper loaded
[    0.862946] PCI: Using ACPI for IRQ routing
[    0.862947] PCI: pci_cache_line_size set to 64 bytes
[    0.863021] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.863022] reserve RAM buffer: 00000000daf80000 - 00000000dbffffff 
[    0.863024] reserve RAM buffer: 000000021fe00000 - 000000021fffffff 
[    0.863079] NetLabel: Initializing
[    0.863080] NetLabel:  domain hash size = 128
[    0.863081] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.863087] NetLabel:  unlabeled traffic allowed by default
[    0.863110] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.863114] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.865124] Switching to clocksource hpet
[    0.867282] Switched to NOHz mode on CPU #0
[    0.867354] Switched to NOHz mode on CPU #3
[    0.867373] Switched to NOHz mode on CPU #2
[    0.867398] Switched to NOHz mode on CPU #1
[    0.868611] AppArmor: AppArmor Filesystem Enabled
[    0.868626] pnp: PnP ACPI init
[    0.868636] ACPI: bus type pnp registered
[    0.868688] pnp 00:00: [bus 00-3f]
[    0.868689] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.868690] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.868692] pnp 00:00: [io  0x0d00-0xffff window]
[    0.868693] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.868694] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.868695] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.868696] pnp 00:00: [mem 0xdfa00000-0xfebfffff window]
[    0.868732] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.868780] pnp 00:01: [io  0x0010-0x001f]
[    0.868781] pnp 00:01: [io  0x0022-0x003f]
[    0.868782] pnp 00:01: [io  0x0044-0x004d]
[    0.868783] pnp 00:01: [io  0x0050-0x005f]
[    0.868784] pnp 00:01: [io  0x0062-0x0063]
[    0.868784] pnp 00:01: [io  0x0065-0x006f]
[    0.868785] pnp 00:01: [io  0x0074-0x007f]
[    0.868786] pnp 00:01: [io  0x0091-0x0093]
[    0.868787] pnp 00:01: [io  0x00a2-0x00bf]
[    0.868788] pnp 00:01: [io  0x00e0-0x00ef]
[    0.868789] pnp 00:01: [io  0x04d0-0x04d1]
[    0.868790] pnp 00:01: [io  0x0290-0x029f]
[    0.868791] pnp 00:01: [io  0x0800-0x0805]
[    0.868792] pnp 00:01: [io  0x0290-0x0294]
[    0.868793] pnp 00:01: [io  0x0880-0x088f]
[    0.868829] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.868830] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.868832] system 00:01: [io  0x0800-0x0805] has been reserved
[    0.868833] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.868834] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.868836] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.868843] pnp 00:02: [dma 4]
[    0.868844] pnp 00:02: [io  0x0000-0x000f]
[    0.868845] pnp 00:02: [io  0x0080-0x0090]
[    0.868846] pnp 00:02: [io  0x0094-0x009f]
[    0.868846] pnp 00:02: [io  0x00c0-0x00df]
[    0.868862] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.868891] pnp 00:03: [irq 0 disabled]
[    0.868898] pnp 00:03: [irq 8]
[    0.868899] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.868914] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.868929] pnp 00:04: [io  0x0070-0x0073]
[    0.868945] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.868950] pnp 00:05: [io  0x0061]
[    0.868964] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.868969] pnp 00:06: [io  0x00f0-0x00ff]
[    0.868972] pnp 00:06: [irq 13]
[    0.868988] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.869144] pnp 00:07: [io  0x03f8-0x03ff]
[    0.869148] pnp 00:07: [irq 4]
[    0.869179] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.869217] pnp 00:08: [io  0x0400-0x04cf]
[    0.869218] pnp 00:08: [io  0x04d2-0x04ff]
[    0.869243] system 00:08: [io  0x0400-0x04cf] has been reserved
[    0.869244] system 00:08: [io  0x04d2-0x04ff] has been reserved
[    0.869246] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.869252] pnp 00:09: [io  0x1000-0x107f]
[    0.869253] pnp 00:09: [io  0x1080-0x10ff]
[    0.869254] pnp 00:09: [io  0x1100-0x117f]
[    0.869255] pnp 00:09: [io  0x1180-0x11ff]
[    0.869282] system 00:09: [io  0x1000-0x107f] has been reserved
[    0.869283] system 00:09: [io  0x1080-0x10ff] has been reserved
[    0.869285] system 00:09: [io  0x1100-0x117f] has been reserved
[    0.869286] system 00:09: [io  0x1180-0x11ff] has been reserved
[    0.869288] system 00:09: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.869392] pnp 00:0a: [io  0x0454-0x0457]
[    0.869423] system 00:0a: [io  0x0454-0x0457] has been reserved
[    0.869424] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.869434] pnp 00:0b: [mem 0xf4000000-0xf7ffffff]
[    0.869466] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.869467] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.869567] pnp 00:0c: [mem 0x000cdc00-0x000cffff]
[    0.869568] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[    0.869569] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[    0.869570] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[    0.869571] pnp 00:0c: [mem 0xdaf80000-0xdafdffff]
[    0.869572] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.869573] pnp 00:0c: [mem 0x00100000-0xdaf7ffff]
[    0.869574] pnp 00:0c: [mem 0xdafe0000-0xdaffffff]
[    0.869575] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.869576] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[    0.869577] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[    0.869578] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.869579] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[    0.869580] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[    0.869581] pnp 00:0c: [mem 0x000e0000-0x000effff]
[    0.869582] pnp 00:0c: [mem 0x20000000-0x201fffff]
[    0.869583] pnp 00:0c: [mem 0x40000000-0x400fffff]
[    0.869584] pnp 00:0c: [mem 0xdb000000-0xdf9fffff]
[    0.869622] system 00:0c: [mem 0x000cdc00-0x000cffff] has been reserved
[    0.869624] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.869625] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.869627] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.869628] system 00:0c: [mem 0xdaf80000-0xdafdffff] could not be reserved
[    0.869629] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.869631] system 00:0c: [mem 0x00100000-0xdaf7ffff] could not be reserved
[    0.869632] system 00:0c: [mem 0xdafe0000-0xdaffffff] has been reserved
[    0.869634] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.869635] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.869637] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.869638] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.869639] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.869641] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.869642] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[    0.869643] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[    0.869645] system 00:0c: [mem 0x40000000-0x400fffff] could not be reserved
[    0.869646] system 00:0c: [mem 0xdb000000-0xdf9fffff] could not be reserved
[    0.869648] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.869657] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[    0.869681] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[    0.869685] pnp: PnP ACPI: found 14 devices
[    0.869686] ACPI: ACPI bus type pnp unregistered
[    0.875093] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
[    0.875095] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.875097] pci 0000:00:1c.7: BAR 15: assigned [mem 0xdfe00000-0xdfefffff pref]
[    0.875099] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.875100] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.875103] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.875107] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfbfffff]
[    0.875110] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.875115] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[    0.875127] pci 0000:02:00.0:   bridge window [io  0xc000-0xcfff]
[    0.875136] pci 0000:02:00.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.875141] pci 0000:02:00.0:   bridge window [mem pref disabled]
[    0.875152] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[    0.875154] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.875158] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.875161] pci 0000:00:1c.3:   bridge window [mem pref disabled]
[    0.875166] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[    0.875167] pci 0000:00:1c.4:   bridge window [io  disabled]
[    0.875171] pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.875174] pci 0000:00:1c.4:   bridge window [mem pref disabled]
[    0.875179] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    0.875179] pci 0000:00:1c.5:   bridge window [io  disabled]
[    0.875183] pci 0000:00:1c.5:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.875186] pci 0000:00:1c.5:   bridge window [mem pref disabled]
[    0.875191] pci 0000:00:1c.6: PCI bridge to [bus 06-06]
[    0.875193] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.875197] pci 0000:00:1c.6:   bridge window [mem disabled]
[    0.875200] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.875206] pci 0000:07:00.0: BAR 6: assigned [mem 0xdfe00000-0xdfe0ffff pref]
[    0.875207] pci 0000:00:1c.7: PCI bridge to [bus 07-07]
[    0.875209] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
[    0.875213] pci 0000:00:1c.7:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.875216] pci 0000:00:1c.7:   bridge window [mem 0xdfe00000-0xdfefffff pref]
[    0.875221] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[    0.875222] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.875226] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.875228] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.875236] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.875244] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.875248] pci 0000:00:1c.0: setting latency timer to 64
[    0.875255] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.875258] pci 0000:00:1c.3: setting latency timer to 64
[    0.875266] pci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.875272] pci 0000:02:00.0: setting latency timer to 64
[    0.875278] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.875281] pci 0000:00:1c.4: setting latency timer to 64
[    0.875287] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.875290] pci 0000:00:1c.5: setting latency timer to 64
[    0.875296] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.875299] pci 0000:00:1c.6: setting latency timer to 64
[    0.875304] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.875307] pci 0000:00:1c.7: setting latency timer to 64
[    0.875313] pci 0000:00:1e.0: setting latency timer to 64
[    0.875315] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.875316] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.875317] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.875319] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.875320] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.875321] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff]
[    0.875322] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.875323] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff]
[    0.875325] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.875326] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.875327] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.875328] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.875329] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.875331] pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.875332] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.875333] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.875334] pci_bus 0000:06: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.875336] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.875337] pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.875338] pci_bus 0000:07: resource 2 [mem 0xdfe00000-0xdfefffff pref]
[    0.875339] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.875340] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.875342] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.875343] pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff]
[    0.875344] pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.875345] pci_bus 0000:08: resource 9 [mem 0xdfa00000-0xfebfffff]
[    0.875361] NET: Registered protocol family 2
[    0.875511] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.876151] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.877119] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.877242] TCP: Hash tables configured (established 524288 bind 65536)
[    0.877243] TCP reno registered
[    0.877253] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.877277] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.877348] NET: Registered protocol family 1
[    0.877358] pci 0000:00:02.0: Boot video device
[    0.915163] PCI: CLS 4 bytes, default 64
[    0.915165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.915167] Placing 64MB software IO TLB between ffff8800d6c00000 - ffff8800dac00000
[    0.915168] software IO TLB at phys 0xd6c00000 - 0xdac00000
[    0.915441] audit: initializing netlink socket (disabled)
[    0.915448] type=2000 audit(1317592880.770:1): initialized
[    0.916912] Freeing initrd memory: 12872k freed
[    0.923701] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.924621] VFS: Disk quotas dquot_6.5.2
[    0.924651] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.924983] fuse init (API version 7.16)
[    0.925030] msgmni has been set to 15832
[    0.925168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.925180] io scheduler noop registered
[    0.925181] io scheduler deadline registered
[    0.925202] io scheduler cfq registered (default)
[    0.925502] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.925513] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.925538] intel_idle: MWAIT substates: 0x1120
[    0.925539] intel_idle: v0.4 model 0x2A
[    0.925540] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.925606] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.925609] ACPI: Power Button [PWRB]
[    0.925635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.925637] ACPI: Power Button [PWRF]
[    0.925735] ACPI: acpi_idle yielding to intel_idle
[    0.926800] ERST: Table is not found!
[    0.926837] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.947363] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.116288] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.116458] Linux agpgart interface v0.103
[    1.116511] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.116572] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.117251] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.117326] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.117895] brd: module loaded
[    1.118153] loop: module loaded
[    1.118201] i2c-core: driver [adp5520] using legacy suspend method
[    1.118202] i2c-core: driver [adp5520] using legacy resume method
[    1.118256] ata_piix 0000:00:1f.2: version 2.13
[    1.118266] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.118269] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.118294] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.118453] scsi0 : ata_piix
[    1.118497] scsi1 : ata_piix
[    1.118811] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    1.118815] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    1.118826] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.118829] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.118852] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.118958] scsi2 : ata_piix
[    1.118995] scsi3 : ata_piix
[    1.119202] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    1.119204] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    1.119232] pata_acpi 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.119249] pata_acpi 0000:07:00.0: setting latency timer to 64
[    1.119260] pata_acpi 0000:07:00.0: PCI INT A disabled
[    1.119406] Fixed MDIO Bus: probed
[    1.119420] PPP generic driver version 2.4.2
[    1.119443] tun: Universal TUN/TAP device driver, 1.6
[    1.119444] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.119486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.119495] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.119507] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.119509] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.119528] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.194759] ehci_hcd 0000:00:1a.0: debug port 2
[    1.198638] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[    1.198647] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    1.214701] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.214785] hub 1-0:1.0: USB hub found
[    1.214788] hub 1-0:1.0: 2 ports detected
[    1.214831] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.214838] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.214841] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.214861] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.214892] ehci_hcd 0000:00:1d.0: debug port 2
[    1.218784] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[    1.218794] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    1.234674] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.234750] hub 2-0:1.0: USB hub found
[    1.234752] hub 2-0:1.0: 2 ports detected
[    1.234786] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.234792] uhci_hcd: USB Universal Host Controller Interface driver
[    1.234853] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.267786] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.267787] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.475188] ata4: SATA link down (SStatus 0 SControl 300)
[    1.485979] ata3: SATA link down (SStatus 0 SControl 300)
[    1.514395] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.514434] mousedev: PS/2 mouse device common for all mice
[    1.514490] rtc_cmos 00:04: RTC can wake from S4
[    1.514538] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.514561] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.514616] device-mapper: uevent: version 1.0.3
[    1.514657] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.514686] device-mapper: multipath: version 1.2.0 loaded
[    1.514687] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.514795] cpuidle: using governor ladder
[    1.514877] cpuidle: using governor menu
[    1.514995] TCP cubic registered
[    1.515059] NET: Registered protocol family 10
[    1.515293] NET: Registered protocol family 17
[    1.515301] Registering the dns_resolver key type
[    1.516046] PM: Hibernation image not present or could not be loaded.
[    1.516052] registered taskstats version 1
[    1.516320]   Magic number: 15:469:46
[    1.516407] rtc_cmos 00:04: setting system clock to 2011-10-02 22:01:22 UTC (1317592882)
[    1.516408] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.516409] EDD information not available.
[    1.534320] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.684642] hub 1-1:1.0: USB hub found
[    1.684744] hub 1-1:1.0: 6 ports detected
[    1.803975] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.913837] Refined TSC clocksource calibration: 3309.719 MHz.
[    1.913840] Switching to clocksource tsc
[    1.954298] hub 2-1:1.0: USB hub found
[    1.954400] hub 2-1:1.0: 8 ports detected
[    1.973810] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.973822] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.973977] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.973990] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.014058] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[    2.014069] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.014168] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[    2.014170] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.014188] ata2.01: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    2.014258] ata1.01: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[    2.014260] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.033798] usb 1-1.3: new high speed USB device using ehci_hcd and address 3
[    2.034132] ata1.00: configured for UDMA/133
[    2.034192] ata2.00: configured for UDMA/133
[    2.053930] ata1.01: configured for UDMA/133
[    2.054117] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[    2.054208] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.054388] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG HD502HJ  1AJ1 PQ: 0 ANSI: 5
[    2.054394] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.054453] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.054583] sd 0:0:0:0: [sda] Write Protect is off
[    2.054585] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.054609] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.054679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.054865] sd 0:0:1:0: [sdb] Write Protect is off
[    2.054866] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.054902] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.073797] ata2.01: configured for UDMA/100
[    2.074727] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[    2.074804] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    2.074812] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.075981] scsi 1:0:1:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.076000] sd 1:0:0:0: [sdc] Write Protect is off
[    2.076002] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.076066]  sda: sda1
[    2.077516] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.079460] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.079462] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.079515] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    2.079541] sr 1:0:1:0: Attached scsi generic sg3 type 5
[    2.081655]  sdb: sdb1 sdb2
[    2.081864] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.082000] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.125132]  sdc: sdc1 sdc2 sdc3
[    2.125313] sd 1:0:0:0: [sdc] Attached SCSI disk
[    2.126315] Freeing unused kernel memory: 956k freed
[    2.126384] Write protecting the kernel read-only data: 10240k
[    2.126967] Freeing unused kernel memory: 184k freed
[    2.129783] Freeing unused kernel memory: 1440k freed
[    2.139697] <30>udev[81]: starting version 167
[    2.144018] hub 1-1.3:1.0: USB hub found
[    2.144122] hub 1-1.3:1.0: 4 ports detected
[    2.151138] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.151157] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    2.151160] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    2.151204] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    2.163471] firewire_ohci 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.166108] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.166122] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.166160] r8169 0000:06:00.0: setting latency timer to 64
[    2.166167] r8169 0000:06:00.0: (unregistered net_device): unknown MAC, using family default
[    2.166249] r8169 0000:06:00.0: irq 40 for MSI/MSI-X
[    2.166503] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xffffc90000c78000, 50:e5:49:3d:a5:32, XID 0c900800 IRQ 40
[    2.193751] xhci_hcd 0000:04:00.0: irq 16, io mem 0xfbaf8000
[    2.193771] xhci_hcd 0000:04:00.0: Failed to enable MSI-X
[    2.193821] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
[    2.193876] usb usb3: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
[    2.193946] xHCI xhci_add_endpoint called for root hub
[    2.193947] xHCI xhci_check_bandwidth called for root hub
[    2.193963] hub 3-0:1.0: USB hub found
[    2.193965] hub 3-0:1.0: 4 ports detected
[    2.194034] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.194052] xhci_hcd 0000:05:00.0: setting latency timer to 64
[    2.194055] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.194078] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    2.223555] usb 1-1.5: new low speed USB device using ehci_hcd and address 4
[    2.223593] firewire_ohci: Added fw-ohci device 0000:03:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    2.223643] xhci_hcd 0000:05:00.0: irq 17, io mem 0xfbef8000
[    2.223695] xhci_hcd 0000:05:00.0: Failed to enable MSI-X
[    2.223768] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[    2.223839] usb usb4: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
[    2.223906] xHCI xhci_add_endpoint called for root hub
[    2.223907] xHCI xhci_check_bandwidth called for root hub
[    2.223921] hub 4-0:1.0: USB hub found
[    2.223923] hub 4-0:1.0: 4 ports detected
[    2.433239] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
[    2.433294] usb 1-1.6: new low speed USB device using ehci_hcd and address 5
[    2.433329] generic-usb 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.5/input0
[    2.443218] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input3
[    2.443269] generic-usb 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.5/input1
[    2.443276] usbcore: registered new interface driver usbhid
[    2.443277] usbhid: USB HID core driver
[    2.552189] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
[    2.552250] generic-usb 0003:046D:C00E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0
[    2.578944] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    2.722876] firewire_core: created device fw0: GUID 0049e550d8e70100, S400
[   11.707773] <30>udev[310]: starting version 167
[   11.713127] lp: driver loaded but no devices found
[   11.715623] coretemp coretemp.0: TjMax is 98 C.
[   11.715652] coretemp coretemp.1: TjMax is 98 C.
[   11.715673] coretemp coretemp.2: TjMax is 98 C.
[   11.715694] coretemp coretemp.3: TjMax is 98 C.
[   11.727372] Adding 8388604k swap on /dev/sdc2.  Priority:-1 extents:1 across:8388604k 
[   11.750722] [drm] Initialized drm 1.1.0 20060810
[   11.754582] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.770044] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.770061] i915 0000:00:02.0: setting latency timer to 64
[   11.806357] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[   11.806359] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   11.806577] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   11.806580] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.806581] [drm] Driver supports precise vblank timestamp query.
[   11.828954] type=1400 audit(1317592892.809:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=433 comm="apparmor_parser"
[   11.829329] type=1400 audit(1317592892.809:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=542 comm="apparmor_parser"
[   11.829442] type=1400 audit(1317592892.809:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
[   11.829749] type=1400 audit(1317592892.809:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=433 comm="apparmor_parser"
[   11.829818] type=1400 audit(1317592892.809:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser"
[   11.830129] type=1400 audit(1317592892.809:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser"
[   11.837417] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.216971] fbcon: inteldrmfb (fb0) is primary device
[   12.217033] Console: switching to colour frame buffer device 240x67
[   12.217053] fb0: inteldrmfb frame buffer device
[   12.217053] drm: registered panic notifier
[   12.217153] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.217187] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.217227] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   12.217246] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.413182] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   12.764488] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[   12.845160] hda_codec: ALC889: BIOS auto-probing.
[   14.869868] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   15.056860] ppdev: user-space parallel port driver
[   15.062339] type=1400 audit(1317592896.049:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=928 comm="apparmor_parser"
[   15.062905] type=1400 audit(1317592896.049:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=928 comm="apparmor_parser"
[   15.168840] type=1400 audit(1317592896.159:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=940 comm="apparmor_parser"
[   15.168995] type=1400 audit(1317592896.159:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=941 comm="apparmor_parser"
[   15.197517] r8169 0000:06:00.0: eth0: link down
[   15.197524] r8169 0000:06:00.0: eth0: link down
[   15.197912] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.104759] vboxdrv: Found 4 processor cores.
[   16.104934] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x4179
[   16.104998] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   16.104999] vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000).
[   16.312725] vboxpci: IOMMU not found (not registered)
[   17.159373] r8169 0000:06:00.0: eth0: link up
[   17.159725] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.273179] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
[   17.363538] EXT4-fs (sdc3): re-mounted. Opts: commit=0
[   18.686670] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
[   18.688299] EXT4-fs (sdc3): re-mounted. Opts: commit=0
[   27.901316] eth0: no IPv6 routers present
[  131.632300] r8169 0000:06:00.0: eth0: link down
[  131.632309] r8169 0000:06:00.0: eth0: link down
[  131.633076] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  133.182568] r8169 0000:06:00.0: eth0: link up
[  133.183307] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  143.802364] eth0: no IPv6 routers present
[  150.087643] r8169 0000:06:00.0: eth0: link up
[  164.466619] r8169 0000:06:00.0: eth0: link up
[  169.892432] r8169 0000:06:00.0: eth0: link up
[  171.451237] r8169 0000:06:00.0: eth0: link up
[  405.081973] r8169 0000:06:00.0: eth0: link up
[  556.783709] usb 1-1.3: USB disconnect, address 3
[ 1401.279348] r8169 0000:06:00.0: eth0: link up
[ 1463.570345] r8169 0000:06:00.0: eth0: link up
[ 1597.111030] r8169 0000:06:00.0: eth0: link up
[ 1616.461672] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 1616.503068] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3374.087747] r8169 0000:06:00.0: eth0: link up
[ 6022.449494] r8169 0000:06:00.0: eth0: link up
[ 7273.063724] usb 1-1.3: new high speed USB device using ehci_hcd and address 6
[ 7273.174556] hub 1-1.3:1.0: USB hub found
[ 7273.174662] hub 1-1.3:1.0: 4 ports detected
[ 7781.898904] r8169 0000:06:00.0: eth0: link down
[ 7781.898941] r8169 0000:06:00.0: eth0: link down
[ 7781.899667] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7783.436300] r8169 0000:06:00.0: eth0: link up
[ 7783.436697] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7787.431427] r8169 0000:06:00.0: eth0: link up
[ 7792.365172] r8169 0000:06:00.0: eth0: link up
[ 7793.114226] r8169 0000:06:00.0: eth0: link up
[ 7794.152463] eth0: no IPv6 routers present
[ 7794.452025] r8169 0000:06:00.0: eth0: link up
[ 7795.420304] r8169 0000:06:00.0: eth0: link up
[ 7796.318729] r8169 0000:06:00.0: eth0: link up
[ 7796.877742] r8169 0000:06:00.0: eth0: link up
[ 7797.616431] r8169 0000:06:00.0: eth0: link up
[ 7798.175421] r8169 0000:06:00.0: eth0: link up
[ 7798.834268] r8169 0000:06:00.0: eth0: link up
[ 7800.151939] r8169 0000:06:00.0: eth0: link up
[ 7803.336311] r8169 0000:06:00.0: eth0: link up
[ 7807.958121] r8169 0000:06:00.0: eth0: link up
[ 7808.906453] r8169 0000:06:00.0: eth0: link up
[ 7809.944610] r8169 0000:06:00.0: eth0: link up
[ 7811.941102] r8169 0000:06:00.0: eth0: link up
[ 7814.237059] r8169 0000:06:00.0: eth0: link up
[ 7814.686225] r8169 0000:06:00.0: eth0: link up
[ 7817.431377] r8169 0000:06:00.0: eth0: link up
[ 7818.269880] r8169 0000:06:00.0: eth0: link up
[ 7819.457876] r8169 0000:06:00.0: eth0: link up
[ 7819.906989] r8169 0000:06:00.0: eth0: link up
[ 7820.925191] r8169 0000:06:00.0: eth0: link up
[ 7821.584028] r8169 0000:06:00.0: eth0: link up
[ 7822.302764] r8169 0000:06:00.0: eth0: link up
[ 7824.079642] r8169 0000:06:00.0: eth0: link up
[ 7825.636885] r8169 0000:06:00.0: eth0: link up
[ 7826.515306] r8169 0000:06:00.0: eth0: link up
[ 7827.363812] r8169 0000:06:00.0: eth0: link up
[ 7828.851187] r8169 0000:06:00.0: eth0: link up
[ 7829.719631] r8169 0000:06:00.0: eth0: link up
[ 7830.538222] r8169 0000:06:00.0: eth0: link up
[ 7831.656220] r8169 0000:06:00.0: eth0: link up
[ 7833.153563] r8169 0000:06:00.0: eth0: link up
[ 7834.161789] r8169 0000:06:00.0: eth0: link up
[ 7835.279812] r8169 0000:06:00.0: eth0: link up
[ 7836.817081] r8169 0000:06:00.0: eth0: link up
[ 7837.665597] r8169 0000:06:00.0: eth0: link up
[ 7838.504114] r8169 0000:06:00.0: eth0: link up
[ 7839.392546] r8169 0000:06:00.0: eth0: link up
[ 7840.161176] r8169 0000:06:00.0: eth0: link up
[ 7840.999699] r8169 0000:06:00.0: eth0: link up
[ 7841.818255] r8169 0000:06:00.0: eth0: link up
[ 7846.240422] r8169 0000:06:00.0: eth0: link up
[ 7846.899257] r8169 0000:06:00.0: eth0: link up
[ 7863.999475] r8169 0000:06:00.0: eth0: link down
[ 7863.999481] r8169 0000:06:00.0: eth0: link down
[ 7864.000240] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7865.521703] r8169 0000:06:00.0: eth0: link up
[ 7865.522065] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7875.748142] eth0: no IPv6 routers present
[ 7877.584999] r8169 0000:06:00.0: eth0: link up
[ 7878.772889] r8169 0000:06:00.0: eth0: link up
[ 7884.213268] r8169 0000:06:00.0: eth0: link up
[ 7906.264273] r8169 0000:06:00.0: eth0: link up
[ 7936.231262] r8169 0000:06:00.0: eth0: link up
[ 8033.529171] r8169 0000:06:00.0: eth0: link up
[ 8039.169197] r8169 0000:06:00.0: eth0: link up
[ 8042.772832] r8169 0000:06:00.0: eth0: link up
[ 8051.786874] r8169 0000:06:00.0: eth0: link up
[ 8052.785116] r8169 0000:06:00.0: eth0: link up
[ 8054.392289] r8169 0000:06:00.0: eth0: link up
[ 8055.450416] r8169 0000:06:00.0: eth0: link up
[ 8056.508524] r8169 0000:06:00.0: eth0: link up
[ 8057.536702] r8169 0000:06:00.0: eth0: link up
[ 8058.554903] r8169 0000:06:00.0: eth0: link up
[ 8059.583088] r8169 0000:06:00.0: eth0: link up
[ 8073.208997] r8169 0000:06:00.0: eth0: link up
[ 8080.556014] r8169 0000:06:00.0: eth0: link up
[ 8080.745663] r8169 0000:06:00.0: eth0: link up
[ 8081.134963] r8169 0000:06:00.0: eth0: link up
[ 8081.524288] r8169 0000:06:00.0: eth0: link up
[ 8082.123217] r8169 0000:06:00.0: eth0: link up
[ 8082.772064] r8169 0000:06:00.0: eth0: link up
[ 8084.439129] r8169 0000:06:00.0: eth0: link up
[ 8085.377474] r8169 0000:06:00.0: eth0: link up
[ 8086.225959] r8169 0000:06:00.0: eth0: link up
[ 8087.054517] r8169 0000:06:00.0: eth0: link up
[ 8087.893008] r8169 0000:06:00.0: eth0: link up
[ 8088.741515] r8169 0000:06:00.0: eth0: link up
[ 8090.268826] r8169 0000:06:00.0: eth0: link up
[ 8091.237116] r8169 0000:06:00.0: eth0: link up
[ 8092.075632] r8169 0000:06:00.0: eth0: link up
[ 8092.904153] r8169 0000:06:00.0: eth0: link up
[ 8093.752658] r8169 0000:06:00.0: eth0: link up
[ 8094.601177] r8169 0000:06:00.0: eth0: link up
[ 8095.439672] r8169 0000:06:00.0: eth0: link up
[ 8096.278175] r8169 0000:06:00.0: eth0: link up
[ 8097.116697] r8169 0000:06:00.0: eth0: link up
[ 8097.965196] r8169 0000:06:00.0: eth0: link up
[ 8098.803727] r8169 0000:06:00.0: eth0: link up
[ 8099.632265] r8169 0000:06:00.0: eth0: link up
[ 8100.480746] r8169 0000:06:00.0: eth0: link up
[ 8101.618766] r8169 0000:06:00.0: eth0: link up
[ 8103.166004] r8169 0000:06:00.0: eth0: link up
[ 8104.014500] r8169 0000:06:00.0: eth0: link up
[ 8104.853026] r8169 0000:06:00.0: eth0: link up
[ 8105.691532] r8169 0000:06:00.0: eth0: link up
[ 8106.530037] r8169 0000:06:00.0: eth0: link up
[ 8107.368576] r8169 0000:06:00.0: eth0: link up
[ 8108.217089] r8169 0000:06:00.0: eth0: link up
[ 8109.015662] r8169 0000:06:00.0: eth0: link up
[ 8109.854169] r8169 0000:06:00.0: eth0: link up
[ 8110.782549] r8169 0000:06:00.0: eth0: link up
[ 8111.561178] r8169 0000:06:00.0: eth0: link up
[ 8112.599324] r8169 0000:06:00.0: eth0: link up
[ 8113.427860] r8169 0000:06:00.0: eth0: link up
[ 8114.446053] r8169 0000:06:00.0: eth0: link up
[ 8115.474244] r8169 0000:06:00.0: eth0: link up
[ 8116.941636] r8169 0000:06:00.0: eth0: link up
[ 8117.900044] r8169 0000:06:00.0: eth0: link up
[ 8118.738476] r8169 0000:06:00.0: eth0: link up
[ 8119.586961] r8169 0000:06:00.0: eth0: link up
[ 8120.495351] r8169 0000:06:00.0: eth0: link up
[ 8121.273963] r8169 0000:06:00.0: eth0: link up
[ 8122.272236] r8169 0000:06:00.0: eth0: link up
[ 8123.300425] r8169 0000:06:00.0: eth0: link up
[ 8124.338550] r8169 0000:06:00.0: eth0: link up
[ 8125.177076] r8169 0000:06:00.0: eth0: link up
[ 8126.195283] r8169 0000:06:00.0: eth0: link up
[ 8127.642719] r8169 0000:06:00.0: eth0: link up
[ 8128.601026] r8169 0000:06:00.0: eth0: link up
[ 8129.998558] r8169 0000:06:00.0: eth0: link up
[ 8131.266316] r8169 0000:06:00.0: eth0: link up
[ 8143.564541] r8169 0000:06:00.0: eth0: link up
[ 8147.996701] r8169 0000:06:00.0: eth0: link up
[ 8149.723652] r8169 0000:06:00.0: eth0: link up
[ 8151.440616] r8169 0000:06:00.0: eth0: link up
[ 8152.528708] r8169 0000:06:00.0: eth0: link up
[ 8153.536926] r8169 0000:06:00.0: eth0: link up
[ 8155.273843] r8169 0000:06:00.0: eth0: link up
[ 8156.481714] r8169 0000:06:00.0: eth0: link up
[ 8157.300256] r8169 0000:06:00.0: eth0: link up
[ 8158.727728] r8169 0000:06:00.0: eth0: link up
[ 8159.606193] r8169 0000:06:00.0: eth0: link up
[ 8160.434727] r8169 0000:06:00.0: eth0: link up
[ 8161.552749] r8169 0000:06:00.0: eth0: link up
[ 8163.030145] r8169 0000:06:00.0: eth0: link up
[ 8164.667235] r8169 0000:06:00.0: eth0: link up
[ 8165.775267] r8169 0000:06:00.0: eth0: link up
[ 8166.893299] r8169 0000:06:00.0: eth0: link up
[ 8167.911488] r8169 0000:06:00.0: eth0: link up
[ 8169.348947] r8169 0000:06:00.0: eth0: link up
[ 8170.287279] r8169 0000:06:00.0: eth0: link up
[ 8171.095871] r8169 0000:06:00.0: eth0: link up
[ 8171.924392] r8169 0000:06:00.0: eth0: link up
[ 8172.742933] r8169 0000:06:00.0: eth0: link up
[ 8173.581464] r8169 0000:06:00.0: eth0: link up
[ 8174.390020] r8169 0000:06:00.0: eth0: link up
[ 8175.228556] r8169 0000:06:00.0: eth0: link up
[ 8176.077054] r8169 0000:06:00.0: eth0: link up
[ 8176.875634] r8169 0000:06:00.0: eth0: link up
[ 8177.714163] r8169 0000:06:00.0: eth0: link up
[ 8178.862126] r8169 0000:06:00.0: eth0: link up
[ 8180.359488] r8169 0000:06:00.0: eth0: link up
[ 8181.517417] r8169 0000:06:00.0: eth0: link up
[ 8183.014789] r8169 0000:06:00.0: eth0: link up
[ 8183.853299] r8169 0000:06:00.0: eth0: link up
[ 8184.991284] r8169 0000:06:00.0: eth0: link up
[ 8186.568484] r8169 0000:06:00.0: eth0: link up
[ 8187.416977] r8169 0000:06:00.0: eth0: link up
[ 8188.455155] r8169 0000:06:00.0: eth0: link up
[ 8189.503325] r8169 0000:06:00.0: eth0: link up
[ 8191.080528] r8169 0000:06:00.0: eth0: link up
[ 8191.938994] r8169 0000:06:00.0: eth0: link up
[ 8192.777500] r8169 0000:06:00.0: eth0: link up
[ 8193.765783] r8169 0000:06:00.0: eth0: link up
[ 8195.163283] r8169 0000:06:00.0: eth0: link up
[ 8196.101634] r8169 0000:06:00.0: eth0: link up
[ 8197.239630] r8169 0000:06:00.0: eth0: link up
[ 8198.247850] r8169 0000:06:00.0: eth0: link up
[ 8199.066383] r8169 0000:06:00.0: eth0: link up
[ 8200.683515] r8169 0000:06:00.0: eth0: link up
[ 8201.771604] r8169 0000:06:00.0: eth0: link up
[ 8268.932818] r8169 0000:06:00.0: eth0: link up
[ 8292.740704] r8169 0000:06:00.0: eth0: link up
[ 8377.243351] r8169 0000:06:00.0: eth0: link up
[ 8377.772680] r8169 0000:06:00.0: eth0: link up
[ 8401.882119] r8169 0000:06:00.0: eth0: link up
[ 8402.581254] r8169 0000:06:00.0: eth0: link up
[ 8430.895317] r8169 0000:06:00.0: eth0: link up

Auffällig ist auf jeden Fall das ganze "link up"-Gespamme am Ende. Das ist jetzt (wo das Problem nicht auftritt) nicht da.
 
Zuletzt bearbeitet:
Zurück
Oben