Rsa

hallo jungs,

folgendes problem,versteht das jemand was damit gemeint ist??

.."reverse the modulus (bytewise) before using it in the RSA decryption".............

ich möchte was entschlüsseln aber es geht nicht über den üblichen weg anscheinend............aber wie ist das gemeint?
 
hi,

also wenn ich erlich sein soll verstehe ich das ganze nicht ,
ich möcht eine nachricht entschlüsseln hab auch soweit alles modulus usw aber ich verstehe nicht wie ich das machen soll ,die formel ist a^p mod n,aber ich soll es so wie oben beschrieben machen,nur verstehe ich das nicht mit bitwise usw...
 
Ich rate einfach mal blind ins Blaue:
1) Stack Overflow: Reversing aufgrund von Little Endian
2) Die Formel zum Entschlüsseln ist nicht "a^p mod n", sondern "c^d mod n", wenn man nach der weit verbreiteten Notation vorgeht, in der c den Chiphertext und d den privaten Schlüssel darstellt. p ist in diesem Fall ein Faktor von n, der nach Berechnung der Schlüssel vernichtet werden muss.
3) Du hast falsch verschlüsselt.
4) Du hast deine Schlüssel falsch generiert.
5) Deine Implementierung ist falsch.
6) Deine Quelle beschreibt RSA falsch.
7) uvm..

Desshalb: Kannst du bitte eine genaue Beschreibung deines Problems posten? Mit einem Textstück ohne Quellenangabe und der Fehlerbeschreibung "funzt nicht" kann man nichts anfangen. Wichtige sind hierbei Informationen, mit denen das Problem nachgestellt und nachvollzogen werden kann, d.h. welcher Buchstabe stellt welchen Parameter innerhalb von RSA dar, welche Formeln benutzt du, wie sieht deine Implementierung aus (sofern vorhanden), usw..
 
also das möchte ich entschlüsseln
Code:
100000002311A854071DE7F1C710CB41FCA330D73B

# ----------------------------------------------
 
Zuletzt bearbeitet:
Und was hat das mit RSA zu tun? In der Fehlermeldung wird im Stacktrace die DES3-Funktionen agesprochen, inkl. der Fehlermeldung "bad decrypt", was auf ein falsches Passwort hindeutet.
 
ja die Fehlermeldung ist normal ,den wenn man richtig entschlüsselt mit rsa dann ist in der Nachricht der 3des schlüssel und der wiederrum entschlüsselt weiter,aber da von anfang an nicht richtig entschlüsselt wird ist auch kein 3des richtig,also bad decrypt.

was heißt das:

reverse the modulus (bytewise) before using it in the RSA decryption ???????????????????

das ist der weg aber ich weiß nicht wie ich es machen soll.
 
ich kenne mich in python's standard lib nicht aus, aber ich vermute mal dass die byteorder technisch bedingt anders ist als in der representation in der du den modulus vorliegen hast ...

angenommen dein modulus sieht codiert etwa so aus:
0xABCDEF (nur deutlich länger)

dann willst du:

0xEFCDAB (2 zeichen hex entsprechen einem byte ... reverse byte order heißt das letzte byte ist das erste, das vorletzte ist das zweite, etc...)

entweder du codierst das selber um, oder du ließt alles als zahl in ein byte array ein, und tauscht dann die reihenfolge ... in der regel gibt es für so standard sachen wie umkehr der reihenfolge auch standardmäßig verfügbare funktionen ... schau mal nach etwas das reverse oder invert order heißt ...

in der größten not, schreib dir halt ne funktion wie diese (pseudocode):

mod = hex2bytes("0xABCDEF")
len = mod.length
len = len - (len%2)
idx = 0
while (idx < (len / 2))
{
tmp = mod[idx]
mod[idx]=mod[len-idx-1]
mod[len-idx-1]=tmp
idx++
}
 
klappt so auch nicht,...was bedeutet das den im genauen?
fast_exponentiation(a, p, n):
"""Calculates r = a^p mod n ????????

also a=(verschlüsselte datei)^010001 mod n(modulus)........ist doch richtig oder?

was bedeutet außerdem ,"Calculates r"??
 
fast_exponentiation(a,p,n) ist ein schneller weg a hoch p mod n zu berechnen ... der algorithmus heist "square and multiply"... das ist notwendig, da du bei derartigen exponenten sehr schnell sehr große zahlen bekommst ...

kurz gesagt: der exponent wird in binärdarstellung gebracht, und danach bit für bit abgearbeitet.

demnach brauchst du also log2(p) schritte für einen exponenten p

diese schritte unterscheiden sich in ihren operationen dahingehend ob das jeweilige bit 0 oder 1 ist, und machen sich zu nutze dass man dabei zu jeder gelegenheit die modulo reduktion durchführen darf ohne das ergebnis zu ändern ... kleine zahlen lassen sich schneller verarbeiten ...

für den 1 schritt heist das ergebnis des schritts: das ergebnis des vorherigen schritts zum quadrat mal a

für den 0 schritt ist es nur das quadrat des vorherigen ergebnisses ...

... mhhh xrayn war schneller ... na egal ... :P
 
jungs danke für die hilfe,ich habs jetzt.

ich hab den fehler,ich mußte in jeder linie des codes den letzten byte entfernen(checksumme)und dann wie oben beschrieben den modulus umdrehen.....................owei...owei
 
Zuletzt bearbeitet:
ich sollte geld für sowas nehmen ... also einmal RSA in "einfach":

man kann RSA mit Mathe, mit viel Mathe oder mit Crypto Mathe erklären ... ich probiers mal mit Mathe ...

aber fangen wir mit den Begrifflichkeiten an

RSA ist ein Asymetrisches Verschlüsselungsverfahren, und besitzt demnach sowohl öffentliche schlüssel (public keys) als auch private schlüssel (private keys / secret keys)

so ein schlüssel ist keine black box, oder ein mystischer zahlensalat, sondern besteht aus bestimmten werten, als da wären:

N der gemeinsame Modulus

d (für decrypt) der private exponent

e (für encrypt) der öffentliche exponent

damit wäre dann für den minimal fall auch schon alles da ...

der öffentliche schlüssel besteht aus N und e, der private besteht aus N und d

je zwei zahlen ... fertig (ok, zur einfacheren berechnung und ausnutzung einer mathematischen abkürzung <hint>chinesicher restsatz</hint> gibts im privaten schlüssel oft noch ein paar angaben mehr, aber die sind optional und erlauben nur eine performantere berechnung)

die schlüssel verbindet eine eigenschaft, weswegen man auch von einem schlüsselpaar spricht ... diese eigenschaft erklärt sich am einfachsten an einer gleichung:

x^(e*d) % N = x
sprich: x hoch (e mal d) modulo N kongruent x

wer noch nie in der mathematik über das wort "kongruent" (ein gleicheitszeichen mit 3 statt 2 Strichen) gestolpert ist, darf auch getrost "gleich" sagen, auch wenn manche mathematiker bei dieser aussage zur schnappathmung neigen


getreu den Herren Leonhard Euler und Pierre de Fermat kann man aus dieser gleichung eine gleichung für e und d herleiten

denn wenn x^(e*d) % N = x ... dann ... x^(e*d) % N = x^1 % N ... daher ... e*d = 1 Mod Phi(N)

doch etwas viele formeln? kein problem ... wichtig ist an dieser stelle der kleine satz von fermat, respektive der satz von euler (der ist die verallgemeinerung davon) und die Eulersche Phi() funktion.

e*d muss kongruent 1 sein modulo Phi(N) ... das ist der aspekt der die beiden zum pärchen werden lässt.

wie man diese formel löst ist teil der schlüsselerzeugung bei RSA und soll uns hier nicht weiter aufhalten (wer es wissen will dem sei google nahegelegt und der hinweis, dass N=p*q ist, Phi(N)=(p-1)*(q-1), man diese spezielle kongruenz auch inverse nennt, und sich sowas mit dem erweiterten euklidischen algorithmus berechnen lässt)

aber zurück zur RSA anwendung...

das schlüsselpaar sei vorhanden, und wir wollen etwas verschlüsseln ...

dazu brauchen wir den öffentlichen schlüssel (e sowie N)

und eine information X (das was verschlüsselt wird; muss zwingend kleiner sein als N)



nun berechnen wir das chiffrat (verschlüsselte information) als c = x^e % N

das ließt sich so schön leicht, aber wenn wir mal einen üblichen wert für e nehmen wäre das z.b. 65537 ... irgendwas hoch 65537 ... na danke ... das wird eine sehr... sehr .... SEHR große zahl ... nein, dein taschenrechner verpackt das nicht ... auch nicht excel ...

der naive ansatz das nun nacheinander auszurechnen ist damit gestorben ... die zahlen werden einfach zu groß ... und wir sind noch gar nicht beim privaten exponenten, der auch mal gerne sowas hier sein kann ... 873458673458723896329659236587326457656175827765326926356723056


aber diese berechnung kann in sehr kurzer zeit durchgeführt werden ... auch ohne kilotonnenweise speichermedien bereit zu stellen

der trick wäre z.b. die modulare binäre exponentiation, so wie weiter oben im thread beschrieben (square and multiply), ein algorithmus bei dem nach jedem schritt die modulo reduktion stattfindet, die zahlen also nicht gigantisch werden, und der so viele schritte braucht wie der exponent bits lang ist ...

sobald wir also auf diese weise c berechnet haben, sind wir mit dem verschlüsseln fertig ...

das ergebnis ... c ... können wir dann wieder entschlüsseln, brauchen dafür aber den privaten schlüssel ...

namentlich d und N

wie geht das nun?

genauso wie die verschlüsselung

x = c^d % N

warum ist das so? ... steht oben ... e und d sind so gewählt worden bei der schlüsselerzeugung dass sie bei ihrer multiplikation als exponenten in einer modulo N formel 1 ergeben (kleiner satz von fermat), damit sind sie gegenainander austauschbar, und die operation ist für beide richtungen (verschlüssel, entschlüsseln) die gleiche ... nur mit anderen werten

lasst uns mal die verschlüsselungs gleichung für c einsetzen:

x= (x^e)^d % N

aus den regeln für die exponentialrechnung ist bekannt:

(x^e)^d = x^(e*d)

da wir mod N rechnen gilt der kleine satz von Fermat ... und da e und d bei der schlüsselerzeugung entsprechend gewählt wurden ist ihr produkt kongruent 1 mod Phi(N)

somit steht da nun

x=x^1 % N

und das x hoch 1 gleich x hoch 1 ist, ist nun wahrlich keine raketentechnik...

warum ist das nun sicher?

weil kein effizienter weg bekannt ist Phi(N) zu berechnen, und man damit die schlüsselerzeugung nicht nachvollziehen kann, ausser man weiß, wie der erzeugende N berechnet hat ... N ist das produkt zweiter starker pseudo primzahlen (p und q) ... jeweils schonmal so vom kalliber einer 1024 bit zahl, was dann in summe N zu einer zahl der größenordnung 2048 bit werden lässt ... oder nach bedarf auch gerne größer wenn man statt 1024 bit primzahlen größere nimmt ... das klingt nunn nicht groß ... 1024 bit ... 2048 bit ... aber zum vergleich ... wenn wir alle atome unserer galaxie durchnummerieren wollten, bräuchten wir am ende nur zahlen mit einer länge von so ca 265 bit ... jedes weitere bit stellt eine verdoppelung des zahlenraums dar ... und bis zu unseren größenordnungen hier haben wir noch reichlich platz
 
naja komm,also auf dem kopf bin ich nicht gefallen,ich meinte eher ob der buchstabe "r" eine besondere bedeutung hat.

aber ich hab noch ne andere frage jetzt wo ich das mit rsa entschlüsseln kann muß ich das danach noch mit 3des entschlüsseln,soweit auch kein problem aber dadurch das es sehr große daten sindist das mit dem tool was ich hab sehr aufwändig da ich nur 128bytes entschlüsseln kann ,also muß ich ständig copypaste benutzen,kenn jemand ein tool wo man das in einem rutsch machen kann?
 
...*soifz*

(nicht getestet... keine garantien... blah)
Code:
using System;
using System.Linq;
using System.Windows.Forms;

namespace TrippleDesPlayground
{
    public class Form1 : Form
    {
        private System.IO.Stream keyfile, inFile, outFile, ivFile;

        public Form1()
        {
            InitializeComponent();
            comboBox1.Items.AddRange(Enum.GetValues(typeof(System.Security.Cryptography.CipherMode)).Cast<object>().ToArray());
            comboBox1.SelectedItem = System.Security.Cryptography.CipherMode.ECB;
        }

        private void button2_Click(object sender, EventArgs e)
        {
            try
            {
                openKeyFile();
                openInputFile();
                openOutputFile();
                if (inFile != null && outFile != null && keyfile != null)
                    encrypt();
            }
            finally
            {
                cleanup();
            }
        }

        private void button1_Click(object sender, EventArgs e)
        {
            try
            {
                openKeyFile();
                openInputFile();
                openOutputFile();
                if (inFile != null && outFile != null && keyfile != null)
                    decrypt();
            }
            finally
            {
                cleanup();
            }
        }

        private void encrypt()
        {
            var csp = PrepCsp();
            var cs = new System.Security.Cryptography.CryptoStream(outFile, csp.CreateEncryptor(), System.Security.Cryptography.CryptoStreamMode.Write);
            doCrypto(cs);
        }

        private void decrypt()
        {
            var csp = PrepCsp();
            var cs = new System.Security.Cryptography.CryptoStream(outFile, csp.CreateDecryptor(), System.Security.Cryptography.CryptoStreamMode.Write);
            doCrypto(cs);
        }

        private void doCrypto(System.Security.Cryptography.CryptoStream cs)
        {
            inFile.CopyTo(cs);
            cs.FlushFinalBlock();
        }

        private System.Security.Cryptography.TripleDESCryptoServiceProvider PrepCsp()
        {
            var csp = new System.Security.Cryptography.TripleDESCryptoServiceProvider();
            var key = new Byte[Math.Min((int)csp.KeySize / 8, (int)keyfile.Length)];
            keyfile.Read(key, 0, key.Length);
            csp.Key = key;
            csp.Mode = (System.Security.Cryptography.CipherMode)comboBox1.SelectedItem;
            switch (csp.Mode)
            {
                case System.Security.Cryptography.CipherMode.ECB:
                    break;
                default:
                    openIvFile();
                    csp.IV = new Byte[Math.Min((int)csp.BlockSize / 8, (int)ivFile.Length)];
                    ivFile.Read(csp.IV, 0, csp.IV.Length);
                    break;
            }
            return csp;
        }


        private void openInputFile()
        {
            var ofd = new OpenFileDialog();
            ofd.Title = "Eingabedatei?";
            if (ofd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.inFile = ofd.OpenFile();
            }
        }

        private void openIvFile()
        {
            var ofd = new OpenFileDialog();
            ofd.Title = "Initialisierungs Vektor Datei?";
            if (ofd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.ivFile = ofd.OpenFile();
            }
        }

        private void openOutputFile()
        {
            var sfd = new SaveFileDialog();
            sfd.Title = "Ausgabedatei?";
            if (sfd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.outFile = sfd.OpenFile();
            }
        }

        private void openKeyFile()
        {
            var ofd = new OpenFileDialog();
            ofd.Title = "Schlüsseldatei?";
            if (ofd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.keyfile = ofd.OpenFile();
            }
        }

        private void cleanup()
        {
            foreach (var item in new System.IO.Stream[] { inFile, outFile, keyfile, ivFile })
            {
                if (item != null)
                    item.Dispose();
            }
            ivFile = inFile = outFile = keyfile = null;
        }


        #region designer kram

        /// <summary>
        /// Required designer variable.
        /// </summary>
        private System.ComponentModel.IContainer components = null;

        /// <summary>
        /// Clean up any resources being used.
        /// </summary>
        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        protected override void Dispose(bool disposing)
        {
            if (disposing && (components != null))
            {
                components.Dispose();
            }
            base.Dispose(disposing);
        }

        #region Windows Form Designer generated code

        /// <summary>
        /// Required method for Designer support - do not modify
        /// the contents of this method with the code editor.
        /// </summary>
        private void InitializeComponent()
        {
            this.button1 = new System.Windows.Forms.Button();
            this.button2 = new System.Windows.Forms.Button();
            this.label1 = new System.Windows.Forms.Label();
            this.comboBox1 = new System.Windows.Forms.ComboBox();
            this.SuspendLayout();
            // 
            // button1
            // 
            this.button1.Location = new System.Drawing.Point(99, 134);
            this.button1.Name = "button1";
            this.button1.Size = new System.Drawing.Size(86, 23);
            this.button1.TabIndex = 0;
            this.button1.Text = "entschlüsseln";
            this.button1.UseVisualStyleBackColor = true;
            this.button1.Click += new System.EventHandler(this.button1_Click);
            // 
            // button2
            // 
            this.button2.Location = new System.Drawing.Point(99, 105);
            this.button2.Name = "button2";
            this.button2.Size = new System.Drawing.Size(86, 23);
            this.button2.TabIndex = 1;
            this.button2.Text = "verschlüsseln";
            this.button2.UseVisualStyleBackColor = true;
            this.button2.Click += new System.EventHandler(this.button2_Click);
            // 
            // label1
            // 
            this.label1.AutoSize = true;
            this.label1.Location = new System.Drawing.Point(62, 47);
            this.label1.Name = "label1";
            this.label1.Size = new System.Drawing.Size(34, 13);
            this.label1.TabIndex = 2;
            this.label1.Text = "Mode";
            // 
            // comboBox1
            // 
            this.comboBox1.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList;
            this.comboBox1.FormattingEnabled = true;
            this.comboBox1.Location = new System.Drawing.Point(102, 44);
            this.comboBox1.Name = "comboBox1";
            this.comboBox1.Size = new System.Drawing.Size(121, 21);
            this.comboBox1.TabIndex = 3;
            // 
            // Form1
            // 
            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.ClientSize = new System.Drawing.Size(284, 262);
            this.Controls.Add(this.comboBox1);
            this.Controls.Add(this.label1);
            this.Controls.Add(this.button2);
            this.Controls.Add(this.button1);
            this.Name = "Form1";
            this.Text = "3DES";
            this.ResumeLayout(false);
            this.PerformLayout();

        }

        #endregion

        private System.Windows.Forms.Button button1;
        private System.Windows.Forms.Button button2;
        private System.Windows.Forms.Label label1;
        private System.Windows.Forms.ComboBox comboBox1;


        #endregion

    }
}
 
...*soifz*

(nicht getestet... keine garantien... blah)
Code:
using System;
using System.Linq;
using System.Windows.Forms;

namespace TrippleDesPlayground
{
    public class Form1 : Form
    {
        private System.IO.Stream keyfile, inFile, outFile, ivFile;

        public Form1()
        {
            InitializeComponent();
            comboBox1.Items.AddRange(Enum.GetValues(typeof(System.Security.Cryptography.CipherMode)).Cast<object>().ToArray());
            comboBox1.SelectedItem = System.Security.Cryptography.CipherMode.ECB;
        }

        private void button2_Click(object sender, EventArgs e)
        {
            try
            {
                openKeyFile();
                openInputFile();
                openOutputFile();
                if (inFile != null && outFile != null && keyfile != null)
                    encrypt();
            }
            finally
            {
                cleanup();
            }
        }

        private void button1_Click(object sender, EventArgs e)
        {
            try
            {
                openKeyFile();
                openInputFile();
                openOutputFile();
                if (inFile != null && outFile != null && keyfile != null)
                    decrypt();
            }
            finally
            {
                cleanup();
            }
        }

        private void encrypt()
        {
            var csp = PrepCsp();
            var cs = new System.Security.Cryptography.CryptoStream(outFile, csp.CreateEncryptor(), System.Security.Cryptography.CryptoStreamMode.Write);
            doCrypto(cs);
        }

        private void decrypt()
        {
            var csp = PrepCsp();
            var cs = new System.Security.Cryptography.CryptoStream(outFile, csp.CreateDecryptor(), System.Security.Cryptography.CryptoStreamMode.Write);
            doCrypto(cs);
        }

        private void doCrypto(System.Security.Cryptography.CryptoStream cs)
        {
            inFile.CopyTo(cs);
            cs.FlushFinalBlock();
        }

        private System.Security.Cryptography.TripleDESCryptoServiceProvider PrepCsp()
        {
            var csp = new System.Security.Cryptography.TripleDESCryptoServiceProvider();
            var key = new Byte[Math.Min((int)csp.KeySize / 8, (int)keyfile.Length)];
            keyfile.Read(key, 0, key.Length);
            csp.Key = key;
            csp.Mode = (System.Security.Cryptography.CipherMode)comboBox1.SelectedItem;
            switch (csp.Mode)
            {
                case System.Security.Cryptography.CipherMode.ECB:
                    break;
                default:
                    openIvFile();
                    csp.IV = new Byte[Math.Min((int)csp.BlockSize / 8, (int)ivFile.Length)];
                    ivFile.Read(csp.IV, 0, csp.IV.Length);
                    break;
            }
            return csp;
        }


        private void openInputFile()
        {
            var ofd = new OpenFileDialog();
            ofd.Title = "Eingabedatei?";
            if (ofd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.inFile = ofd.OpenFile();
            }
        }

        private void openIvFile()
        {
            var ofd = new OpenFileDialog();
            ofd.Title = "Initialisierungs Vektor Datei?";
            if (ofd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.ivFile = ofd.OpenFile();
            }
        }

        private void openOutputFile()
        {
            var sfd = new SaveFileDialog();
            sfd.Title = "Ausgabedatei?";
            if (sfd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.outFile = sfd.OpenFile();
            }
        }

        private void openKeyFile()
        {
            var ofd = new OpenFileDialog();
            ofd.Title = "Schlüsseldatei?";
            if (ofd.ShowDialog(this) == System.Windows.Forms.DialogResult.OK)
            {
                this.keyfile = ofd.OpenFile();
            }
        }

        private void cleanup()
        {
            foreach (var item in new System.IO.Stream[] { inFile, outFile, keyfile, ivFile })
            {
                if (item != null)
                    item.Dispose();
            }
            ivFile = inFile = outFile = keyfile = null;
        }


        #region designer kram

        /// <summary>
        /// Required designer variable.
        /// </summary>
        private System.ComponentModel.IContainer components = null;

        /// <summary>
        /// Clean up any resources being used.
        /// </summary>
        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        protected override void Dispose(bool disposing)
        {
            if (disposing && (components != null))
            {
                components.Dispose();
            }
            base.Dispose(disposing);
        }

        #region Windows Form Designer generated code

        /// <summary>
        /// Required method for Designer support - do not modify
        /// the contents of this method with the code editor.
        /// </summary>
        private void InitializeComponent()
        {
            this.button1 = new System.Windows.Forms.Button();
            this.button2 = new System.Windows.Forms.Button();
            this.label1 = new System.Windows.Forms.Label();
            this.comboBox1 = new System.Windows.Forms.ComboBox();
            this.SuspendLayout();
            // 
            // button1
            // 
            this.button1.Location = new System.Drawing.Point(99, 134);
            this.button1.Name = "button1";
            this.button1.Size = new System.Drawing.Size(86, 23);
            this.button1.TabIndex = 0;
            this.button1.Text = "entschlüsseln";
            this.button1.UseVisualStyleBackColor = true;
            this.button1.Click += new System.EventHandler(this.button1_Click);
            // 
            // button2
            // 
            this.button2.Location = new System.Drawing.Point(99, 105);
            this.button2.Name = "button2";
            this.button2.Size = new System.Drawing.Size(86, 23);
            this.button2.TabIndex = 1;
            this.button2.Text = "verschlüsseln";
            this.button2.UseVisualStyleBackColor = true;
            this.button2.Click += new System.EventHandler(this.button2_Click);
            // 
            // label1
            // 
            this.label1.AutoSize = true;
            this.label1.Location = new System.Drawing.Point(62, 47);
            this.label1.Name = "label1";
            this.label1.Size = new System.Drawing.Size(34, 13);
            this.label1.TabIndex = 2;
            this.label1.Text = "Mode";
            // 
            // comboBox1
            // 
            this.comboBox1.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList;
            this.comboBox1.FormattingEnabled = true;
            this.comboBox1.Location = new System.Drawing.Point(102, 44);
            this.comboBox1.Name = "comboBox1";
            this.comboBox1.Size = new System.Drawing.Size(121, 21);
            this.comboBox1.TabIndex = 3;
            // 
            // Form1
            // 
            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.ClientSize = new System.Drawing.Size(284, 262);
            this.Controls.Add(this.comboBox1);
            this.Controls.Add(this.label1);
            this.Controls.Add(this.button2);
            this.Controls.Add(this.button1);
            this.Name = "Form1";
            this.Text = "3DES";
            this.ResumeLayout(false);
            this.PerformLayout();

        }

        #endregion

        private System.Windows.Forms.Button button1;
        private System.Windows.Forms.Button button2;
        private System.Windows.Forms.Label label1;
        private System.Windows.Forms.ComboBox comboBox1;


        #endregion

    }
}
Daaaaaanke:)
 
Zurück
Oben