Backtrack 5 r3 Wlan Stick Ralink rt

menox007 · Jun 12, 2013

HIer mein Problem, wie folgt kann ich unter dem wicd manager kein wlan finden. HIer nun die benötigten Daten, um nach dem Fehler zu suchen und mir evtl zu helfen ich eier da jetzt schon mehr als eine Woche mit rum.
HAbe auch Seiten gefunden, jedoch komme ich nichtb weiter meiner Meinung nach müsste alles richtig sein aber hm. seht selbst.

root@bt:~# lsusb
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@bt:~# airmon-ng

Interface Chipset Driver

wlan0 Ralink 2573 USB rt73usb - [phy1]

ID 050d:705a USB Ralink RT2573 WEP WPA WP2
Funktioniert einwandfrei out-of-the-box (Getestet mit Ubuntu 10.04 und 10.10)

quelle:
Ralink

so nun HOFFE ich ihr könne mir helfen. BITTE

bitmuncher · Jun 12, 2013

Was sagen dir denn die Logs, wenn du einen Scan machst und wenn der Adapter vom System aktiviert wird? Relevant dürfte dafür vor allem das Syslog und der Output des Kernels (Befehl 'dmesg' oder geloggt in /var/log/messages) sein.

menox007 · Jun 12, 2013

dmsg

Code:

[    2.217644] pcieport 0000:00:17.1: setting latency timer to 64
[    2.217693] pcieport 0000:00:17.1: irq 57 for MSI/MSI-X
[    2.217742] pcieport 0000:00:17.2: setting latency timer to 64
[    2.217791] pcieport 0000:00:17.2: irq 58 for MSI/MSI-X
[    2.217840] pcieport 0000:00:17.3: setting latency timer to 64
[    2.217889] pcieport 0000:00:17.3: irq 59 for MSI/MSI-X
[    2.217937] pcieport 0000:00:17.4: setting latency timer to 64
[    2.217986] pcieport 0000:00:17.4: irq 60 for MSI/MSI-X
[    2.218035] pcieport 0000:00:17.5: setting latency timer to 64
[    2.218084] pcieport 0000:00:17.5: irq 61 for MSI/MSI-X
[    2.218133] pcieport 0000:00:17.6: setting latency timer to 64
[    2.218182] pcieport 0000:00:17.6: irq 62 for MSI/MSI-X
[    2.218231] pcieport 0000:00:17.7: setting latency timer to 64
[    2.218279] pcieport 0000:00:17.7: irq 63 for MSI/MSI-X
[    2.218328] pcieport 0000:00:18.0: setting latency timer to 64
[    2.218377] pcieport 0000:00:18.0: irq 64 for MSI/MSI-X
[    2.218426] pcieport 0000:00:18.1: setting latency timer to 64
[    2.218475] pcieport 0000:00:18.1: irq 65 for MSI/MSI-X
[    2.218524] pcieport 0000:00:18.2: setting latency timer to 64
[    2.218573] pcieport 0000:00:18.2: irq 66 for MSI/MSI-X
[    2.218621] pcieport 0000:00:18.3: setting latency timer to 64
[    2.218670] pcieport 0000:00:18.3: irq 67 for MSI/MSI-X
[    2.218719] pcieport 0000:00:18.4: setting latency timer to 64
[    2.218768] pcieport 0000:00:18.4: irq 68 for MSI/MSI-X
[    2.218817] pcieport 0000:00:18.5: setting latency timer to 64
[    2.218866] pcieport 0000:00:18.5: irq 69 for MSI/MSI-X
[    2.218915] pcieport 0000:00:18.6: setting latency timer to 64
[    2.218963] pcieport 0000:00:18.6: irq 70 for MSI/MSI-X
[    2.219012] pcieport 0000:00:18.7: setting latency timer to 64
[    2.219061] pcieport 0000:00:18.7: irq 71 for MSI/MSI-X
[    2.219110] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    2.219159] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    2.219208] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    2.219253] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    2.219302] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[    2.219346] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[    2.219395] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[    2.219439] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[    2.219487] pcieport 0000:00:15.4: Signaling PME through PCIe PME interrupt
[    2.219531] pcie_pme 0000:00:15.4:pcie01: service driver pcie_pme loaded
[    2.219580] pcieport 0000:00:15.5: Signaling PME through PCIe PME interrupt
[    2.219624] pcie_pme 0000:00:15.5:pcie01: service driver pcie_pme loaded
[    2.219673] pcieport 0000:00:15.6: Signaling PME through PCIe PME interrupt
[    2.219721] pcie_pme 0000:00:15.6:pcie01: service driver pcie_pme loaded
[    2.219770] pcieport 0000:00:15.7: Signaling PME through PCIe PME interrupt
[    2.219816] pcie_pme 0000:00:15.7:pcie01: service driver pcie_pme loaded
[    2.219864] pcieport 0000:00:16.0: Signaling PME through PCIe PME interrupt
[    2.219909] pcie_pme 0000:00:16.0:pcie01: service driver pcie_pme loaded
[    2.219958] pcieport 0000:00:16.1: Signaling PME through PCIe PME interrupt
[    2.220003] pcie_pme 0000:00:16.1:pcie01: service driver pcie_pme loaded
[    2.220052] pcieport 0000:00:16.2: Signaling PME through PCIe PME interrupt
[    2.220095] pcie_pme 0000:00:16.2:pcie01: service driver pcie_pme loaded
[    2.220144] pcieport 0000:00:16.3: Signaling PME through PCIe PME interrupt
[    2.220188] pcie_pme 0000:00:16.3:pcie01: service driver pcie_pme loaded
[    2.220237] pcieport 0000:00:16.4: Signaling PME through PCIe PME interrupt
[    2.220281] pcie_pme 0000:00:16.4:pcie01: service driver pcie_pme loaded
[    2.220330] pcieport 0000:00:16.5: Signaling PME through PCIe PME interrupt
[    2.220374] pcie_pme 0000:00:16.5:pcie01: service driver pcie_pme loaded
[    2.220423] pcieport 0000:00:16.6: Signaling PME through PCIe PME interrupt
[    2.220468] pcie_pme 0000:00:16.6:pcie01: service driver pcie_pme loaded
[    2.220517] pcieport 0000:00:16.7: Signaling PME through PCIe PME interrupt
[    2.220560] pcie_pme 0000:00:16.7:pcie01: service driver pcie_pme loaded
[    2.220609] pcieport 0000:00:17.0: Signaling PME through PCIe PME interrupt
[    2.220653] pcie_pme 0000:00:17.0:pcie01: service driver pcie_pme loaded
[    2.220702] pcieport 0000:00:17.1: Signaling PME through PCIe PME interrupt
[    2.220746] pcie_pme 0000:00:17.1:pcie01: service driver pcie_pme loaded
[    2.220795] pcieport 0000:00:17.2: Signaling PME through PCIe PME interrupt
[    2.220843] pcie_pme 0000:00:17.2:pcie01: service driver pcie_pme loaded
[    2.220892] pcieport 0000:00:17.3: Signaling PME through PCIe PME interrupt
[    2.220936] pcie_pme 0000:00:17.3:pcie01: service driver pcie_pme loaded
[    2.221196] pcieport 0000:00:17.4: Signaling PME through PCIe PME interrupt
[    2.221245] pcie_pme 0000:00:17.4:pcie01: service driver pcie_pme loaded
[    2.221294] pcieport 0000:00:17.5: Signaling PME through PCIe PME interrupt
[    2.221339] pcie_pme 0000:00:17.5:pcie01: service driver pcie_pme loaded
[    2.221388] pcieport 0000:00:17.6: Signaling PME through PCIe PME interrupt
[    2.221432] pcie_pme 0000:00:17.6:pcie01: service driver pcie_pme loaded
[    2.221481] pcieport 0000:00:17.7: Signaling PME through PCIe PME interrupt
[    2.221525] pcie_pme 0000:00:17.7:pcie01: service driver pcie_pme loaded
[    2.221574] pcieport 0000:00:18.0: Signaling PME through PCIe PME interrupt
[    2.221618] pcie_pme 0000:00:18.0:pcie01: service driver pcie_pme loaded
[    2.221667] pcieport 0000:00:18.1: Signaling PME through PCIe PME interrupt
[    2.221710] pcie_pme 0000:00:18.1:pcie01: service driver pcie_pme loaded
[    2.221759] pcieport 0000:00:18.2: Signaling PME through PCIe PME interrupt
[    2.221808] pcie_pme 0000:00:18.2:pcie01: service driver pcie_pme loaded
[    2.221857] pcieport 0000:00:18.3: Signaling PME through PCIe PME interrupt
[    2.221901] pcie_pme 0000:00:18.3:pcie01: service driver pcie_pme loaded
[    2.221949] pcieport 0000:00:18.4: Signaling PME through PCIe PME interrupt
[    2.221994] pcie_pme 0000:00:18.4:pcie01: service driver pcie_pme loaded
[    2.222043] pcieport 0000:00:18.5: Signaling PME through PCIe PME interrupt
[    2.222087] pcie_pme 0000:00:18.5:pcie01: service driver pcie_pme loaded
[    2.222136] pcieport 0000:00:18.6: Signaling PME through PCIe PME interrupt
[    2.222179] pcie_pme 0000:00:18.6:pcie01: service driver pcie_pme loaded
[    2.222228] pcieport 0000:00:18.7: Signaling PME through PCIe PME interrupt
[    2.222273] pcie_pme 0000:00:18.7:pcie01: service driver pcie_pme loaded
[    2.222322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.225181] pciehp 0000:00:15.0:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225229] pciehp 0000:00:15.0:pcie04: service driver pciehp loaded
[    2.225278] pciehp 0000:00:15.1:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225327] pciehp 0000:00:15.1:pcie04: service driver pciehp loaded
[    2.225376] pciehp 0000:00:15.2:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225425] pciehp 0000:00:15.2:pcie04: service driver pciehp loaded
[    2.225474] pciehp 0000:00:15.3:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225523] pciehp 0000:00:15.3:pcie04: service driver pciehp loaded
[    2.225571] pciehp 0000:00:15.4:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225620] pciehp 0000:00:15.4:pcie04: service driver pciehp loaded
[    2.225669] pciehp 0000:00:15.5:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225718] pciehp 0000:00:15.5:pcie04: service driver pciehp loaded
[    2.225767] pciehp 0000:00:15.6:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225816] pciehp 0000:00:15.6:pcie04: service driver pciehp loaded
[    2.225865] pciehp 0000:00:15.7:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.225913] pciehp 0000:00:15.7:pcie04: service driver pciehp loaded
[    2.225962] pciehp 0000:00:16.0:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226011] pciehp 0000:00:16.0:pcie04: service driver pciehp loaded
[    2.226060] pciehp 0000:00:16.1:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226109] pciehp 0000:00:16.1:pcie04: service driver pciehp loaded
[    2.226158] pciehp 0000:00:16.2:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226207] pciehp 0000:00:16.2:pcie04: service driver pciehp loaded
[    2.226255] pciehp 0000:00:16.3:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226304] pciehp 0000:00:16.3:pcie04: service driver pciehp loaded
[    2.226353] pciehp 0000:00:16.4:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226402] pciehp 0000:00:16.4:pcie04: service driver pciehp loaded
[    2.226451] pciehp 0000:00:16.5:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226500] pciehp 0000:00:16.5:pcie04: service driver pciehp loaded
[    2.226549] pciehp 0000:00:16.6:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226597] pciehp 0000:00:16.6:pcie04: service driver pciehp loaded
[    2.226646] pciehp 0000:00:16.7:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.226695] pciehp 0000:00:16.7:pcie04: service driver pciehp loaded
[    2.226744] pciehp 0000:00:17.0:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229190] pciehp 0000:00:17.0:pcie04: service driver pciehp loaded
[    2.229238] pciehp 0000:00:17.1:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229287] pciehp 0000:00:17.1:pcie04: service driver pciehp loaded
[    2.229336] pciehp 0000:00:17.2:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229385] pciehp 0000:00:17.2:pcie04: service driver pciehp loaded
[    2.229434] pciehp 0000:00:17.3:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229483] pciehp 0000:00:17.3:pcie04: service driver pciehp loaded
[    2.229532] pciehp 0000:00:17.4:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229580] pciehp 0000:00:17.4:pcie04: service driver pciehp loaded
[    2.229629] pciehp 0000:00:17.5:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229678] pciehp 0000:00:17.5:pcie04: service driver pciehp loaded
[    2.229727] pciehp 0000:00:17.6:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229776] pciehp 0000:00:17.6:pcie04: service driver pciehp loaded
[    2.229825] pciehp 0000:00:17.7:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229874] pciehp 0000:00:17.7:pcie04: service driver pciehp loaded
[    2.229922] pciehp 0000:00:18.0:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.229971] pciehp 0000:00:18.0:pcie04: service driver pciehp loaded
[    2.230020] pciehp 0000:00:18.1:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230069] pciehp 0000:00:18.1:pcie04: service driver pciehp loaded
[    2.230118] pciehp 0000:00:18.2:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230167] pciehp 0000:00:18.2:pcie04: service driver pciehp loaded
[    2.230216] pciehp 0000:00:18.3:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230264] pciehp 0000:00:18.3:pcie04: service driver pciehp loaded
[    2.230313] pciehp 0000:00:18.4:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230362] pciehp 0000:00:18.4:pcie04: service driver pciehp loaded
[    2.230411] pciehp 0000:00:18.5:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230460] pciehp 0000:00:18.5:pcie04: service driver pciehp loaded
[    2.230509] pciehp 0000:00:18.6:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230558] pciehp 0000:00:18.6:pcie04: service driver pciehp loaded
[    2.230606] pciehp 0000:00:18.7:pcie04: HPC vendor_id 15ad device_id 7a0 ss_vid 15ad ss_did 7a0
[    2.230655] pciehp 0000:00:18.7:pcie04: service driver pciehp loaded
[    2.230704] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.230753] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    2.230802] vesafb: scrolling: redraw
[    2.230851] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.230900] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1536k, total 1536k
[    2.231028] fbcon: VESA VGA (fb0) is primary device
[    2.233174] bootsplash 3.1.6-2004/03/31: looking for picture...
[    2.257145]  silentjpeg size 69816 bytes,
[    2.257242] ...found (1024x768, 69708 bytes, v3).
[    2.301115] Console: switching to colour frame buffer device 107x34
[    2.333086] fb0: VESA VGA frame buffer device
[    2.333184] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    2.333282] ACPI: AC Adapter [ACAD] (on-line)
[    2.333477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.333526] ACPI: Power Button [PWRF]
[    2.381242] ERST: Table is not found!
[    2.381290] GHES: HEST is not enabled!
[    2.381339] isapnp: Scanning for PnP cards...
[    2.700389] isapnp: No Plug & Play device found
[    2.700957] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.724799] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.752774] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.784842] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.812729] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.813166] Linux agpgart interface v0.103
[    2.816621] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    2.820702] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0
[    2.825972] brd: module loaded
[    2.829296] loop: module loaded
[    2.832728] ata_piix 0000:00:07.1: version 2.13
[    2.840786] scsi0 : ata_piix
[    2.848696] scsi1 : ata_piix
[    2.848745] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10c0 irq 14
[    2.848793] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10c8 irq 15
[    2.856813] Fixed MDIO Bus: probed
[    2.860754] tun: Universal TUN/TAP device driver, 1.6
[    2.864554] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.864701] arcnet loaded.
[    2.868617] PPP generic driver version 2.4.2
[    2.868835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.872612] ehci_hcd 0000:02:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.880664] ehci_hcd 0000:02:03.0: EHCI Host Controller
[    2.884822] ehci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 1
[    2.888554] ehci_hcd 0000:02:03.0: cache line size of 32 is not supported
[    2.888603] ehci_hcd 0000:02:03.0: irq 17, io mem 0xc9000000
[    2.913694] ehci_hcd 0000:02:03.0: USB 2.0 started, EHCI 1.00
[    2.928631] hub 1-0:1.0: USB hub found
[    2.932985] hub 1-0:1.0: 6 ports detected
[    2.936491] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.936539] uhci_hcd: USB Universal Host Controller Interface driver
[    2.942967] uhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.944520] uhci_hcd 0000:02:00.0: UHCI Host Controller
[    2.944666] uhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.949358] uhci_hcd 0000:02:00.0: irq 18, io base 0x000020c0
[    2.952975] hub 2-0:1.0: USB hub found
[    2.958268] hub 2-0:1.0: 2 ports detected
[    2.960866] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
[    2.968559] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.968689] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.973738] mousedev: PS/2 mouse device common for all mice
[    2.974260] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.992858] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.004772] device-mapper: uevent: version 1.0.3
[    3.060442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.065127] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email]dm-devel@redhat.com[/email]
[    3.065192] EISA: Probing bus 0 at eisa.0
[    3.069125] EISA: Cannot allocate resource for mainboard
[    3.069189] Cannot allocate resource for EISA slot 1
[    3.069254] Cannot allocate resource for EISA slot 2
[    3.069318] Cannot allocate resource for EISA slot 3
[    3.069383] Cannot allocate resource for EISA slot 4
[    3.073471] Cannot allocate resource for EISA slot 5
[    3.073535] Cannot allocate resource for EISA slot 6
[    3.073600] Cannot allocate resource for EISA slot 7
[    3.073664] Cannot allocate resource for EISA slot 8
[    3.081080] EISA: Detected 0 cards.
[    3.081339] cpufreq-nforce2: No nForce2 chipset.
[    3.085112] cpuidle: using governor ladder
[    3.085176] cpuidle: using governor menu
[    3.093318] EFI Variables Facility v0.08 2004-May-17
[    3.093447] ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
[    3.097207] ata2.00: configured for UDMA/33
[    3.116399] TCP cubic registered
[    3.116464] NET: Registered protocol family 10
[    3.128389] NET: Registered protocol family 17
[    3.140657] Registering the dns_resolver key type
[    3.144382] Using IPI No-Shortcut mode
[    3.144695] registered taskstats version 1
[    3.156642] scsi 1:0:0:0: CD-ROM            NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5
[    3.162118] Refined TSC clocksource calibration: 2200.000 MHz.
[    3.172408] Switching to clocksource tsc
[    3.201123] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.204814] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.205102] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.208355] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    3.268438] rtc_cmos 00:04: setting system clock to 2013-06-12 11:06:06 UTC (1371035166)
[    3.272300] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.272365] EDD information not available.
[    3.272701] Freeing unused kernel memory: 704k freed
[    3.280290] Write protecting the kernel text: 5508k
[    3.284265] Write protecting the kernel read-only data: 2108k
[    3.329092] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    3.392671] udev: starting version 151
[    3.402356] udevd (81): /proc/81/oom_adj is deprecated, please use /proc/81/oom_score_adj instead.
[    3.747772] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    3.816488] Fusion MPT base driver 3.04.20
[    3.819969] Copyright (c) 1999-2008 LSI Corporation
[    3.850378] Fusion MPT SPI Host driver 3.04.20
[    3.860043] Floppy drive(s): fd0 is 1.44M
[    3.901654] mptspi 0000:00:10.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.924267] FDC 0 is a post-1991 82077
[    3.944038] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email]tsbogend@alpha.franken.de[/email]
[    3.952420] mptbase: ioc0: Initiating bringup
[    3.972350] pcnet32 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.979601] pcnet32: PCnet/PCI II 79C970A at 0x2000, 00:0c:29:37:54:52 assigned IRQ 19
[    3.987643] pcnet32: eth0: registered as PCnet/PCI II 79C970A
[    3.992262] pcnet32: 1 cards_found
[    4.015583] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[    4.043630] ioc0: LSI53C1030 B0: Capabilities={Initiator}
[    4.151456] hub 2-2:1.0: USB hub found
[    4.151847] hub 2-2:1.0: 7 ports detected
[    4.175500] input: VMware VMware Virtual USB Mouse as /devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/input/input2
[    4.181565] generic-usb 0003:0E0F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [VMware VMware Virtual USB Mouse] on usb-0000:02:00.0-1/input0
[    4.185938] input: VMware VMware Virtual USB Mouse as /devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.1/input/input3
[    4.193990] generic-usb 0003:0E0F:0003.0002: input,hidraw1: USB HID v1.10 Mouse [VMware VMware Virtual USB Mouse] on usb-0000:02:00.0-1/input1
[    4.204550] usbcore: registered new interface driver usbhid
[    4.207530] usbhid: USB HID core driver
[    4.220363] scsi2 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17
[    4.344348] scsi 2:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
[    4.351444] scsi target2:0:0: Beginning Domain Validation
[    4.360062] scsi target2:0:0: Domain Validation skipping write tests
[    4.378755] scsi target2:0:0: Ending Domain Validation
[    4.447357] scsi target2:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
[    4.463616] sd 2:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
[    4.467926] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.475025] sd 2:0:0:0: [sda] Write Protect is off
[    4.475120] sd 2:0:0:0: [sda] Mode Sense: 61 00 00 00
[    4.475311] sd 2:0:0:0: [sda] Cache data unavailable
[    4.475407] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    4.483704] sd 2:0:0:0: [sda] Cache data unavailable
[    4.488555] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    4.521390]  sda: sda1 sda2 < sda5 >
[    4.526216] sd 2:0:0:0: [sda] Cache data unavailable
[    4.529947] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    4.533433] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.607183] aufs 3.2-20120109
[    5.618238] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
[    5.634196] VMware PVSCSI driver - version 1.0.1.0-k
[    5.730516] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.557479] Adding 916476k swap on /dev/sda5.  Priority:-1 extents:1 across:916476k 
[    7.610950] udev: starting version 151
[    7.860190] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.032534] lp: driver loaded but no devices found
[    8.044057] [354]: VMCI: shared components initialized.
[    8.044121] Probing for vmci/PCI.
[    8.044185] vmci 0000:00:07.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.044249] Found vmci/PCI at 0x1080, irq 16.
[    8.044314] VMCI: using capabilities 0xc.
[    8.044378] [354]: VMCI: Host capability check: PASSED.
[    8.044442] vmci 0000:00:07.7: irq 72 for MSI/MSI-X
[    8.044506] vmci 0000:00:07.7: irq 73 for MSI/MSI-X
[    8.044571] Registered vmci device.
[    8.044781] [354]: VMCI: Using guest personality
[    8.044846] [354]: VMCI: host components initialized.
[    8.045145] [354]: VMCI: Module registered (name=vmci,major=10,minor=57).
[    8.045200] [354]: VMCI: Using host personality
[    8.045229] [354]: VMCI: Module (name=vmci) is initialized
[    8.081693] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
[    8.085055] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.208349] udev: renamed network interface eth0 to eth1
[    8.404630] parport_pc 00:09: reported by Plug and Play ACPI
[    8.404694] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    8.479123] psmouse serio1: hgpk: ID: 10 00 64
[    8.507530] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    8.783416] lp0: using parport0 (interrupt-driven).
[    9.040654] ppdev: user-space parallel port driver
[    9.081578] cfg80211: Calling CRDA to update world regulatory domain
[   10.345347] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[   10.751802] cfg80211: World regulatory domain updated:
[   10.751852] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.751906] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.751921] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.751927] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.751932] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.751938] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.198089] snd_ens1371 0000:02:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.998000] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   14.999019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999142] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   14.999149] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999154] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   14.999160] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999164] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   14.999170] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999175] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   14.999180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999185] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   14.999191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999195] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   14.999201] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999206] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   14.999212] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999216] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   14.999222] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999227] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   14.999232] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999237] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   14.999243] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.999267] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   14.999273] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.999278] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   14.999284] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.999288] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   14.999294] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.639476] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.698118] pcnet32 0000:02:01.0: eth1: link up
[   17.042869] Registered led device: rt73usb-phy0::radio
[   17.043583] Registered led device: rt73usb-phy0::assoc
[   17.043824] Registered led device: rt73usb-phy0::quality
[   17.688747] usbcore: registered new interface driver rt73usb
[   21.119318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.998483] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   23.004181] acpiphp: Slot [32] registered
[   23.005766] acpiphp: Slot [33] registered
[   23.009253] acpiphp: Slot [34] registered
[   23.010281] acpiphp: Slot [35] registered
[   23.011233] acpiphp: Slot [36] registered
[   23.012473] acpiphp: Slot [37] registered
[   23.014077] acpiphp: Slot [38] registered
[   23.016405] acpiphp: Slot [39] registered
[   23.017548] acpiphp: Slot [40] registered
[   23.018118] acpiphp: Slot [41] registered
[   23.018170] acpiphp: Slot [42] registered
[   23.018214] acpiphp: Slot [43] registered
[   23.018255] acpiphp: Slot [44] registered
[   23.018295] acpiphp: Slot [45] registered
[   23.018336] acpiphp: Slot [46] registered
[   23.018379] acpiphp: Slot [47] registered
[   23.018420] acpiphp: Slot [48] registered
[   23.018461] acpiphp: Slot [49] registered
[   23.018509] acpiphp: Slot [50] registered
[   23.018549] acpiphp: Slot [51] registered
[   23.018592] acpiphp: Slot [52] registered
[   23.018632] acpiphp: Slot [53] registered
[   23.018672] acpiphp: Slot [54] registered
[   23.018713] acpiphp: Slot [55] registered
[   23.018753] acpiphp: Slot [56] registered
[   23.018798] acpiphp: Slot [57] registered
[   23.018841] acpiphp: Slot [58] registered
[   23.018882] acpiphp: Slot [59] registered
[   23.018950] acpiphp: Slot [60] registered
[   23.018993] acpiphp: Slot [61] registered
[   23.019037] acpiphp: Slot [62] registered
[   23.019078] acpiphp: Slot [63] registered
[   29.706474] eth1: no IPv6 routers present
[   38.727259] pcnet32 0000:02:01.0: eth1: link up
[   40.115264] pcnet32 0000:02:01.0: eth1: link up
[   51.437181] eth1: no IPv6 routers present
[  110.585246] pcnet32 0000:02:01.0: eth1: link up
[  122.208060] eth1: no IPv6 routers present

Der Log aus Var Messages

Code:

Jun 12 07:06:17 bt kernel: [    3.284265] Write protecting the kernel read-only data: 2108k
Jun 12 07:06:17 bt kernel: [    3.329092] usb 1-1: new high-speed USB device number 2 using ehci_hcd
Jun 12 07:06:17 bt kernel: [    3.392671] udev: starting version 151
Jun 12 07:06:17 bt kernel: [    3.402356] udevd (81): /proc/81/oom_adj is deprecated, please use /proc/81/oom_score_adj instead.
Jun 12 07:06:17 bt kernel: [    3.747772] usb 2-1: new full-speed USB device number 2 using uhci_hcd
Jun 12 07:06:17 bt kernel: [    3.816488] Fusion MPT base driver 3.04.20
Jun 12 07:06:17 bt kernel: [    3.819969] Copyright (c) 1999-2008 LSI Corporation
Jun 12 07:06:17 bt kernel: [    3.850378] Fusion MPT SPI Host driver 3.04.20
Jun 12 07:06:17 bt kernel: [    3.860043] Floppy drive(s): fd0 is 1.44M
Jun 12 07:06:17 bt kernel: [    3.901654] mptspi 0000:00:10.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jun 12 07:06:17 bt kernel: [    3.924267] FDC 0 is a post-1991 82077
Jun 12 07:06:17 bt kernel: [    3.944038] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email]tsbogend@alpha.franken.de[/email]
Jun 12 07:06:17 bt kernel: [    3.952420] mptbase: ioc0: Initiating bringup
Jun 12 07:06:17 bt kernel: [    3.972350] pcnet32 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Jun 12 07:06:17 bt kernel: [    3.979601] pcnet32: PCnet/PCI II 79C970A at 0x2000, 00:0c:29:37:54:52 assigned IRQ 19
Jun 12 07:06:17 bt kernel: [    3.987643] pcnet32: eth0: registered as PCnet/PCI II 79C970A
Jun 12 07:06:17 bt kernel: [    3.992262] pcnet32: 1 cards_found
Jun 12 07:06:17 bt kernel: [    4.015583] usb 2-2: new full-speed USB device number 3 using uhci_hcd
Jun 12 07:06:17 bt kernel: [    4.043630] ioc0: LSI53C1030 B0: Capabilities={Initiator}
Jun 12 07:06:17 bt kernel: [    4.151456] hub 2-2:1.0: USB hub found
Jun 12 07:06:17 bt kernel: [    4.151847] hub 2-2:1.0: 7 ports detected
Jun 12 07:06:17 bt kernel: [    4.175500] input: VMware VMware Virtual USB Mouse as /devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/input/input2
Jun 12 07:06:18 bt kernel: [    4.181565] generic-usb 0003:0E0F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [VMware VMware Virtual USB Mouse] on usb-0000:02:00.0-1/input0
Jun 12 07:06:18 bt kernel: [    4.185938] input: VMware VMware Virtual USB Mouse as /devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.1/input/input3
Jun 12 07:06:18 bt kernel: [    4.193990] generic-usb 0003:0E0F:0003.0002: input,hidraw1: USB HID v1.10 Mouse [VMware VMware Virtual USB Mouse] on usb-0000:02:00.0-1/input1
Jun 12 07:06:18 bt kernel: [    4.204550] usbcore: registered new interface driver usbhid
Jun 12 07:06:18 bt kernel: [    4.207530] usbhid: USB HID core driver
Jun 12 07:06:18 bt kernel: [    4.220363] scsi2 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17
Jun 12 07:06:18 bt kernel: [    4.344348] scsi 2:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
Jun 12 07:06:18 bt kernel: [    4.351444] scsi target2:0:0: Beginning Domain Validation
Jun 12 07:06:18 bt kernel: [    4.360062] scsi target2:0:0: Domain Validation skipping write tests
Jun 12 07:06:18 bt kernel: [    4.378755] scsi target2:0:0: Ending Domain Validation
Jun 12 07:06:18 bt kernel: [    4.447357] scsi target2:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
Jun 12 07:06:18 bt kernel: [    4.463616] sd 2:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
Jun 12 07:06:18 bt kernel: [    4.467926] sd 2:0:0:0: Attached scsi generic sg1 type 0
Jun 12 07:06:18 bt kernel: [    4.475025] sd 2:0:0:0: [sda] Write Protect is off
Jun 12 07:06:18 bt kernel: [    4.475311] sd 2:0:0:0: [sda] Cache data unavailable
Jun 12 07:06:18 bt kernel: [    4.483704] sd 2:0:0:0: [sda] Cache data unavailable
Jun 12 07:06:18 bt kernel: [    4.521390]  sda: sda1 sda2 < sda5 >
Jun 12 07:06:18 bt kernel: [    4.526216] sd 2:0:0:0: [sda] Cache data unavailable
Jun 12 07:06:18 bt kernel: [    4.533433] sd 2:0:0:0: [sda] Attached SCSI disk
Jun 12 07:06:18 bt kernel: [    5.607183] aufs 3.2-20120109
Jun 12 07:06:18 bt kernel: [    5.618238] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
Jun 12 07:06:18 bt kernel: [    5.634196] VMware PVSCSI driver - version 1.0.1.0-k
Jun 12 07:06:18 bt kernel: [    5.730516] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jun 12 07:06:18 bt kernel: [    7.557479] Adding 916476k swap on /dev/sda5.  Priority:-1 extents:1 across:916476k 
Jun 12 07:06:18 bt kernel: [    7.610950] udev: starting version 151
Jun 12 07:06:18 bt kernel: [    7.860190] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Jun 12 07:06:18 bt kernel: [    8.032534] lp: driver loaded but no devices found
Jun 12 07:06:18 bt kernel: [    8.044121] Probing for vmci/PCI.
Jun 12 07:06:18 bt kernel: [    8.044185] vmci 0000:00:07.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 12 07:06:18 bt kernel: [    8.044249] Found vmci/PCI at 0x1080, irq 16.
Jun 12 07:06:18 bt kernel: [    8.044314] VMCI: using capabilities 0xc.
Jun 12 07:06:18 bt kernel: [    8.044571] Registered vmci device.
Jun 12 07:06:18 bt kernel: [    8.085055] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 12 07:06:18 bt kernel: [    8.208349] udev: renamed network interface eth0 to eth1
Jun 12 07:06:18 bt kernel: [    8.404630] parport_pc 00:09: reported by Plug and Play ACPI
Jun 12 07:06:18 bt kernel: [    8.404694] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jun 12 07:06:18 bt kernel: [    8.507530] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Jun 12 07:06:18 bt kernel: [    8.783416] lp0: using parport0 (interrupt-driven).
Jun 12 07:06:18 bt kernel: [    9.040654] ppdev: user-space parallel port driver
Jun 12 07:06:18 bt kernel: [    9.081578] cfg80211: Calling CRDA to update world regulatory domain
Jun 12 07:06:18 bt kernel: [   10.345347] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
Jun 12 07:06:18 bt kernel: [   10.751802] cfg80211: World regulatory domain updated:
Jun 12 07:06:18 bt kernel: [   10.751852] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 12 07:06:18 bt kernel: [   10.751906] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 12 07:06:18 bt kernel: [   10.751921] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 12 07:06:18 bt kernel: [   10.751927] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 12 07:06:18 bt kernel: [   10.751932] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 12 07:06:18 bt kernel: [   10.751938] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 12 07:06:18 bt kernel: [   13.198089] snd_ens1371 0000:02:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 12 07:06:20 bt kernel: [   15.698118] pcnet32 0000:02:01.0: eth1: link up
Jun 12 07:06:20 bt kernel: [   17.688747] usbcore: registered new interface driver rt73usb
Jun 12 07:06:24 bt kernel: [   21.119318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun 12 07:06:26 bt kernel: [   22.998483] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jun 12 07:06:26 bt kernel: [   23.004181] acpiphp: Slot [32] registered
Jun 12 07:06:26 bt kernel: [   23.005766] acpiphp: Slot [33] registered
Jun 12 07:06:26 bt kernel: [   23.009253] acpiphp: Slot [34] registered
Jun 12 07:06:26 bt kernel: [   23.010281] acpiphp: Slot [35] registered
Jun 12 07:06:26 bt kernel: [   23.011233] acpiphp: Slot [36] registered
Jun 12 07:06:26 bt kernel: [   23.012473] acpiphp: Slot [37] registered
Jun 12 07:06:26 bt kernel: [   23.014077] acpiphp: Slot [38] registered
Jun 12 07:06:26 bt kernel: [   23.016405] acpiphp: Slot [39] registered
Jun 12 07:06:26 bt kernel: [   23.017548] acpiphp: Slot [40] registered
Jun 12 07:06:26 bt kernel: [   23.018118] acpiphp: Slot [41] registered
Jun 12 07:06:26 bt kernel: [   23.018170] acpiphp: Slot [42] registered
Jun 12 07:06:26 bt kernel: [   23.018214] acpiphp: Slot [43] registered
Jun 12 07:06:26 bt kernel: [   23.018255] acpiphp: Slot [44] registered
Jun 12 07:06:26 bt kernel: [   23.018295] acpiphp: Slot [45] registered
Jun 12 07:06:26 bt kernel: [   23.018336] acpiphp: Slot [46] registered
Jun 12 07:06:26 bt kernel: [   23.018379] acpiphp: Slot [47] registered
Jun 12 07:06:26 bt kernel: [   23.018420] acpiphp: Slot [48] registered
Jun 12 07:06:26 bt kernel: [   23.018461] acpiphp: Slot [49] registered
Jun 12 07:06:26 bt kernel: [   23.018509] acpiphp: Slot [50] registered
Jun 12 07:06:26 bt kernel: [   23.018549] acpiphp: Slot [51] registered
Jun 12 07:06:26 bt kernel: [   23.018592] acpiphp: Slot [52] registered
Jun 12 07:06:26 bt kernel: [   23.018632] acpiphp: Slot [53] registered
Jun 12 07:06:26 bt kernel: [   23.018672] acpiphp: Slot [54] registered
Jun 12 07:06:26 bt kernel: [   23.018713] acpiphp: Slot [55] registered
Jun 12 07:06:26 bt kernel: [   23.018753] acpiphp: Slot [56] registered
Jun 12 07:06:26 bt kernel: [   23.018798] acpiphp: Slot [57] registered
Jun 12 07:06:26 bt kernel: [   23.018841] acpiphp: Slot [58] registered
Jun 12 07:06:26 bt kernel: [   23.018882] acpiphp: Slot [59] registered
Jun 12 07:06:26 bt kernel: [   23.018950] acpiphp: Slot [60] registered
Jun 12 07:06:26 bt kernel: [   23.018993] acpiphp: Slot [61] registered
Jun 12 07:06:26 bt kernel: [   23.019037] acpiphp: Slot [62] registered
Jun 12 07:06:26 bt kernel: [   23.019078] acpiphp: Slot [63] registered
Jun 12 07:06:41 bt kernel: [   38.727259] pcnet32 0000:02:01.0: eth1: link up
Jun 12 07:06:42 bt kernel: [   40.115264] pcnet32 0000:02:01.0: eth1: link up
Jun 12 07:07:52 bt kernel: [  110.585246] pcnet32 0000:02:01.0: eth1: link up
Jun 12 07:11:37 bt kernel: [  335.344238] pcnet32 0000:02:01.0: eth1: link up
Jun 12 07:12:01 bt kernel: [  359.350034] usb 1-1: USB disconnect, device number 2
Jun 12 07:12:05 bt kernel: [  362.801157] usb 1-1: new high-speed USB device number 3 using ehci_hcd
Jun 12 07:12:06 bt kernel: [  364.184039] usb 1-1: USB disconnect, device number 3

Ach übrigens neuerdings also heute sagt er unter wicd manager not connectet. HAbe einer Anleitung gefolgt und den Stick also ralink 25... Balcklistet in /etc/modprobe.d habe es aber rückgängig gemacht und rebootet denke aber schon es hat damit zu tun (dass im wicd Manager steht not connectet) denn sonst stand dort immer ne ip

root@bt:~# airmon-ng start wlan0

Found 3 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID Name
1456 dhclient
1707 dhclient3
1776 dhclient3
Process with PID 1707 (dhclient3) is running on interface wlan0

Interface Chipset Driver

wlan0 Ralink 2573 USB rt73usb - [phy0]
(monitor mode enabled on mon0)

Hatte dann auch im wicd manager kurz eine ip die dann wieder verschwand.

bitmuncher · Jun 13, 2013

Ich sehe da erstmal keinen Fehler. Verlass dich aber auch nicht zu sehr auf irgendwelche Manager-Tools, sondern nimm die Werkzeuge des Systems. Schau mit 'ifconfig' ob du eine IP bekommst und wenn ja, ob diese zur IP-Range deines Routers passt, d.h. innerhalb seiner DHCP-Range liegt. Sollte die Karte bei 'ifconfig' nicht aufgelistet sein, dann schau mit 'ifconfig -a' nach, ob sie dort auftaucht. Ist sie dort auch nicht drin, dann liegt tatsächlich ein Treiber-Problem vor. Wird sie dort aufgelistet, sollte man Schritt für Schritt an die Fehlersuche gehen.

1. Kannst du dich beim WLAN authentifizieren?
2. Macht der Rechner korrekt einen DHCP-Request und bekommt er auf diesen eine Antwort?
3. Wenn eine IP zugewiesen wird, stimmen dann die Routing-Einstellungen und die DNS-Einstellungen?

menox007 · Jun 13, 2013

Danke erstmal ich werde es morgen prüfen! Melde mich dann wieder

menox007 · Jun 14, 2013

root@bt:~# ifconfig
eth1 Link encap:Ethernet HWaddr 00:0c:29:37:54:52
inet addr:192.168.126.128 Bcast:192.168.126.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe37:5452/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:75 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8057 (8.0 KB) TX bytes:3452 (3.4 KB)
Interrupt:19 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:42 errors:0 dropped:0 overruns:0 frame:0
TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8861 (8.8 KB) TX bytes:8861 (8.8 KB)

wlan0 Link encap:Ethernet HWaddr 94:44:52:03:fb:bb
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

da ist es also schon das Problem. So beim Treiber ist das Problem son mist die Frage, die große Frage ist nämlich jetzt wie den richtigen installieren!

stoooooooop ich hatte das system neu aufgesetzt und ifconfig wlan0 up getippt nun plötzlich ist alles da hmm.

bitmuncher · Jun 14, 2013

wlan0 wurde ja bereits aufgeführt. Es war lediglich nicht gestartet, was du dann mit dem ifup getan hast.

Backtrack 5 r3 Wlan Stick Ralink rt

menox007

0

bitmuncher

Senior-Nerd

menox007

0

bitmuncher

Senior-Nerd

menox007

0

menox007

0

bitmuncher

Senior-Nerd