lm-sensors: Problem?

S

Serow

0
Hi,
hier mal meine lm-sensors Ausgabe:
w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.12 V (min = +0.00 V, max = +1.74 V)
in1: +12.20 V (min = +7.23 V, max = +12.99 V)
AVCC: +3.26 V (min = +2.32 V, max = +2.82 V) ALARM
3VCC: +3.26 V (min = +2.85 V, max = +3.78 V)
in4: +1.74 V (min = +0.42 V, max = +1.78 V)
in5: +1.58 V (min = +1.56 V, max = +0.23 V) ALARM
in6: +5.40 V (min = +2.89 V, max = +4.92 V) ALARM
VSB: +3.26 V (min = +1.30 V, max = +3.44 V)
VBAT: +1.78 V (min = +1.15 V, max = +0.82 V) ALARM
Case Fan: 0 RPM (min = 48214 RPM, div = 4) ALARM
CPU Fan: 958 RPM (min = 530 RPM, div = 16)
Aux Fan: 0 RPM (min = 4272 RPM, div = 4) ALARM
fan4: 0 RPM (min = 30681 RPM, div = 4) ALARM
fan5: 0 RPM (min = 3629 RPM, div = 4) ALARM
Sys Temp: +41°C (high = +30°C, hyst = +88°C)
CPU Temp: +56.0°C (high = +80.0°C, hyst = +75.0°C)
AUX Temp: +119.0°C (high = +80.0°C, hyst = +75.0°C) ALARM

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +54°C (high = +85°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +53°C (high = +85°C)
Zum Vergrößern anklicken....

Da steht recht viel "ALARM". Ist das ein Problem? AUX-Temp sieht nicht gut aus. Aber was ist das überhaupt?
 
Die AUX-Temp kannst Du i.d.R. ignorieren (aus praktischen Gruenden iwie. Usus), diese ist undifiniert.

EDIT:
There is no standard for sensor registers layout, so the "Aux" temperature could show the temperature of the CPU or the motherboard, or might be a non-connected wire of the sensor chip, and so it could show a bogus value.
Zum Vergrößern anklicken....
 
Um antworten zu können musst du eingeloggt sein.
Zurück
Oben